
ESP8266 NodeMCU V3 (CP2102)
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The ESP8266 NodeMCU V3 (CP2102) is a WiFi development board with the CP2102 USB-serial chip, 4 MB of flash and 11 usable GPIO on a slightly wider, breadboard-friendly body.
CP2102 is the reason people pick this variant: Windows usually recognises it without a manual driver hunt, so a first upload tends to just work. Same ESP8266 otherwise, with the same Arduino IDE and NodeMCU Lua support and micro-USB power. Typical builds are web relays, sensor posters, MQTT nodes and WiFi clocks.
- CP2102 USB-serial, driverless on most modern Windows installs
- ESP8266 with 4 MB flash, 11 usable GPIO at 3.3 V logic
- Arduino IDE or NodeMCU Lua over the same micro-USB cable
- Wider V3 body than the V2, with an extra pin row on each edge
If the price box says Contact for price, a WhatsApp message gets you the current rate.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
MCU: ESP8266
USB-Serial: CP2102
Flash: 4MB
Digital I/O Pins: 11 (usable)
| Category | Dev Boards |
| Model no. | NODEMCU-V3-CP2102 |
| Availability | Sourced on request — ask for price & lead time |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the ESP8266 NodeMCU V3 (CP2102)
What is the ESP8266 NodeMCU V3 (CP2102) used for?
WiFi IoT projects: switching relays from a phone, posting sensor readings to Blynk or MQTT, running a small web server, building a WiFi weather station. The board is both the microcontroller and the WiFi radio.
Why choose CP2102 over the CH340 version?
CP2102 is the better-known USB-serial chip: Windows 10 and 11 usually find its driver on their own, so first uploads tend to be trouble-free. Functionally the ESP8266 side is identical.
How do I program it for the first time?
Add the ESP8266 board package to the Arduino IDE, pick NodeMCU 1.0 (ESP-12E module), select the COM port and upload over micro-USB. The onboard USB serial does the flashing.
How many pins can I actually use?
11 usable GPIO at 3.3 V logic, plus one analog input. D3, D4 and D8 are boot-strapping pins, so keep them free or floating at power-up and put sensors on D1, D2, D5, D6 and D7.
ESP8266 NodeMCU V3 এর দাম কত?
এই পেজের ওপরেই বর্তমান দাম দেখানো থাকে; Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিন, আজকের দাম জানিয়ে দেবো।
ঢাকার বাইরে অর্ডার করা যাবে?
যাবে। সারা বাংলাদেশে ডেলিভারি হয়, ক্যাশ অন ডেলিভারিতে পণ্য হাতে পেয়ে টাকা দেওয়া যায়। কুরিয়ার চার্জ অর্ডারের আগে WhatsApp-এ কনফার্ম করা হয়।

