
Robotics
Mecanum Wheel Robot Chassis Kit
৳0
Omnidirectional chassis kit using four mecanum wheels, allowing a robot to strafe sideways and rotate in place.
- Wheels: 4x Mecanum wheels
- Drive: 4x DC gear motors
- Movement: Omnidirectional
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
| Category | Robotics |
| Model no. | MECANUM-CHASSIS-KIT |
| Availability | Out of stock — request notify |
| Delivery | Cash on Delivery, nationwide Bangladesh |
| Wheels | 4x Mecanum wheels |
| Drive | 4x DC gear motors |
| Movement | Omnidirectional |
Questions about the Mecanum Wheel Robot Chassis Kit
What is the Mecanum Wheel Robot Chassis Kit used for?
The Mecanum Wheel Robot Chassis Kit is a robotics component commonly used for building and driving robots, robotic arms, and other moving mechanisms.
Is the Mecanum Wheel Robot Chassis Kit compatible with Arduino and ESP32?
Yes, the Mecanum Wheel Robot Chassis Kit works with Arduino, ESP32, ESP8266, and most other microcontroller boards using standard digital, analog, I2C, SPI, or UART connections, depending on the module.
How do I connect the Mecanum Wheel Robot Chassis Kit to my project?
Connect the power (VCC) and ground (GND) pins first, then wire the signal or data pin(s) to the appropriate digital, analog, or communication pins on your board, and install any required library before uploading your code.
Mecanum Wheel Robot Chassis Kit কিভাবে ব্যবহার করবো?
Mecanum Wheel Robot Chassis Kit টি রোবট, রোবোটিক আর্ম এবং অন্যান্য মুভিং মেকানিজম তৈরি করার জন্য ব্যবহার করা হয়। এটি সাধারণত Arduino বা ESP32 কোডের মাধ্যমে কন্ট্রোল করা হয়।
Mecanum Wheel Robot Chassis Kit কেনো ব্যবহার করা হয়?
এই robotics component টি প্রজেক্টে নির্ভরযোগ্যভাবে ডেটা সংগ্রহ বা নির্দিষ্ট কাজ সম্পন্ন করার জন্য ব্যবহার করা হয়, যা ম্যানুয়ালি করা কঠিন বা অসম্ভব।
Mecanum Wheel Robot Chassis Kit কোথায় পাওয়া যাবে এবং কিভাবে লাগাবো?
এটি Tekko-এর ওয়েবসাইট ও শোরুমে পাওয়া যাবে। লাগানোর জন্য প্রথমে VCC ও GND পিন সংযোগ করুন, এরপর সিগন্যাল/ডেটা পিনটি আপনার Arduino বা ESP32 বোর্ডের সঠিক পিনের সাথে যুক্ত করুন।
