
P2N2222A
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
Buy P2N2222A at the best price in Bangladesh.
The P2N2222A is ON Semiconductor's general-purpose NPN transistor in the famous 2222 family - a small TO-92 part that switches up to 600 mA at 40 V and amplifies small signals with a gain of 100 to 300. It is the natural next step beyond the BC547 when your load is hungrier: small motors, relay coils, buzzer drivers, LED strings and audio preamp stages all sit comfortably inside its ratings, and its faster response suits pulse and switching circuits too. One detail deserves respect: the P2N2222A lead order differs from the PN2222A many beginners memorise, so check the flat-face pinout (or probe it with a multimeter) before soldering - the FAQ below explains how. Students in Bangladesh keep these in bulk because they appear in virtually every analog-electronics lab and driver-stage design. Buy P2N2222A in Bangladesh from Tekko and stock the transistor your projects keep asking for.
Key Features:
• General-purpose NPN transistor in a compact TO-92 package
• Handles up to 600 mA collector current at 40 V collector-emitter
• DC gain (hFE) of 100-300 for switching and amplifier stages
• Approx. 300 MHz transition frequency suits fast pulse circuits
• 625 mW power dissipation at 25 degrees C case temperature
• Ideal driver for relays, small motors, buzzers and LED strings
• Direct family member of the 2N2222A/PN2222A with familiar behaviour
• Economical enough to buy in quantities for lab and class use
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Device Type: NPN general-purpose amplifier / switch transistor
Package: TO-92, 3 leads
Collector-Emitter Voltage (VCEO): 40 V
Collector-Base Voltage (VCBO): 75 V
Emitter-Base Voltage (VEBO): 6 V
Collector Current (IC): 600 mA continuous
Power Dissipation: 625 mW at 25 degree C
DC Current Gain (hFE): 100 - 300 at IC = 150 mA
Transition Frequency (fT): approx. 300 MHz
Pinout: commonly Collector - Base - Emitter from the flat face (verify - differs from PN2222A)
Equivalent Family: 2N2222A, PN2222A (check pinout and ratings before substituting)
Typical Uses: relay and motor drivers, audio preamps, pulse and logic-level switching
| Category | Modules |
| Model no. | P2N2222A |
| Availability | In stock |
| In stock | 20 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the P2N2222A
What is the P2N2222A transistor?
It is a general-purpose NPN bipolar transistor in a TO-92 package, rated 40 V and 600 mA with a gain of 100-300. It switches small loads and amplifies signals, which is why it appears in driver stages, audio circuits and countless microcontroller projects.
What loads can it switch from an Arduino or ESP32 pin?
Anything up to a few hundred milliamps: relay coils, small DC motors, buzzers, LED strings and 7-segment digits. Put a 1 kOhm resistor between the GPIO and the base, connect the emitter to ground, and let the collector sink the load current.
Which pin is which on the P2N2222A?
The P2N2222A is commonly arranged Collector - Base - Emitter when you hold the flat face toward you with the legs down - the opposite order of the PN2222A many tutorials assume. Verify with the datasheet or a multimeter's hFE/diode test before soldering, because swapping collector and emitter cripples the circuit.
What base resistor should I use?
For 5 V logic driving a few hundred milliamps, 1 kOhm is the usual choice: it pushes enough base current for the 100+ gain to saturate the transistor. For lighter loads, 2.2 kOhm to 10 kOhm works; avoid going below about 470 Ohm on a bare logic pin.
How is it different from the BC547?
The BC547 tops out around 100 mA, while the P2N2222A carries up to 600 mA - so for relay coils and motors the 2222 family is the safer pick. Pin order and gain ranges also differ, so a BC547 drop-in replacement is not automatic; check the pinout each time.
Can I use it as an audio amplifier?
Yes - with a gain of 100-300 and roughly 300 MHz bandwidth, it handles small-signal preamp and driver stages comfortably. Classic one- and two-transistor amplifier designs built around the 2222 family work unchanged with this part.
Is the P2N2222A beginner-friendly for a first transistor circuit?
Yes, once the pinout is confirmed - it tolerates ordinary bench mistakes, costs little to replace, and teaches the standard switching pattern (resistor into base, load on collector) that every later driver circuit reuses.
P2N2222A ট্রানজিস্টরের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন - ওখানেই আপডেটেড প্রাইস দেওয়া থাকে।
P2N2222A কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে, অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারি করা হয়।
প্রজেক্টে এই ট্রানজিস্টর কী কাজে লাগে?
রিলে, ছোট মোটর, বাজার বা LED স্ট্রিং - Arduino-র দুর্বল পিন দিয়ে এই ধরনের বড় লোড চালাতে হয়, আর সেই ড্রাইভার হিসেবেই 2222 পরিবারের এই NPN ট্রানজিস্টর সবচেয়ে বেশি ব্যবহৃত হয়।
ব্রেডবোর্ডে কিভাবে লাগাবো?
ফ্ল্যাট দিক সামনে রেখে প্রথমে পিন চেক করুন (P2N2222A-তে সাধারণত C-B-E), তারপর বেসে 1k ওহম রেজিস্টর দিয়ে GPIO যোগ করুন, এমিটার GND-তে আর লোড কালেক্টরে দিন - পিন হাই করলেই লোড চালু হবে।
PN2222A-র সাথে পার্থক্য কি?
রেটিং প্রায় একই, কিন্তু লেগের ক্রম ভিন্ন - PN2222A-তে E-B-C হলে P2N2222A-তে প্রায়ই C-B-E; তাই টিউটোরিয়াল কপি করার আগে ডেটাশিট বা মাল্টিমিটার দিয়ে পিন যাচাই করে নেওয়াই বুদ্ধিমানের কাজ।

