Skip to content
Sensors

RFID Reader Module RC522

৳0

13.56MHz RFID reader/writer module with included tag and card, widely used for access-control and asset-tracking projects.

  • Frequency: 13.56MHz
  • Interface: SPI
  • Operating Voltage: 3.3V

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategorySensors
Model no.RC522
AvailabilityOut of stock — request notify
DeliveryCash on Delivery, nationwide Bangladesh
Frequency13.56MHz
InterfaceSPI
Operating Voltage3.3V

Questions about the RFID Reader Module RC522

What is the RFID Reader Module RC522 used for?
The RFID Reader Module RC522 is a sensor module commonly used for detecting real-world physical conditions and feeding that data into an Arduino, ESP32, or Raspberry Pi project.
Is the RFID Reader Module RC522 compatible with Arduino and ESP32?
Yes, the RFID Reader Module RC522 works with Arduino, ESP32, ESP8266, and most other microcontroller boards using standard digital, analog, I2C, SPI, or UART connections, depending on the module.
How do I connect the RFID Reader Module RC522 to my project?
Connect the power (VCC) and ground (GND) pins first, then wire the signal or data pin(s) to the appropriate digital, analog, or communication pins on your board, and install any required library before uploading your code.
RFID Reader Module RC522 কিভাবে ব্যবহার করবো?
RFID Reader Module RC522 টি বাস্তব জগতের বিভিন্ন অবস্থা (তাপমাত্রা, দূরত্ব, গ্যাস ইত্যাদি) মেপে Arduino বা ESP32 প্রজেক্টে ডেটা দেওয়ার জন্য ব্যবহার করা হয়। এটি সাধারণত Arduino বা ESP32 কোডের মাধ্যমে কন্ট্রোল করা হয়।
RFID Reader Module RC522 কেনো ব্যবহার করা হয়?
এই sensor module টি প্রজেক্টে নির্ভরযোগ্যভাবে ডেটা সংগ্রহ বা নির্দিষ্ট কাজ সম্পন্ন করার জন্য ব্যবহার করা হয়, যা ম্যানুয়ালি করা কঠিন বা অসম্ভব।
RFID Reader Module RC522 কোথায় পাওয়া যাবে এবং কিভাবে লাগাবো?
এটি Tekko-এর ওয়েবসাইট ও শোরুমে পাওয়া যাবে। লাগানোর জন্য প্রথমে VCC ও GND পিন সংযোগ করুন, এরপর সিগন্যাল/ডেটা পিনটি আপনার Arduino বা ESP32 বোর্ডের সঠিক পিনের সাথে যুক্ত করুন।