
0820 Coin Vibration motor (s)
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The 0820 coin vibration motor (s) is an 8 mm flat pancake motor, about 2 mm thick, that turns a 3 V supply into the gentlest buzz of the family. The Small variant reads closer to a phone's quiet notification tap than to an alarm, which suits smart rings, card trackers and slim wearables where a strong kick would feel wrong. Two thin wires on the back solder onto a coin cell holder, a Li-ion rail or a driver board.
- 8 mm diameter, roughly 2 mm thick, fits slim and curved housings
- Rated approx 3 V DC, runs from about 2.5 V to 3.5 V
- Draws around 60-100 mA while spinning
- Gentle feedback, the quietest of the L/M/S variants
Drive it through a transistor or driver stage with a flyback diode, never straight from a GPIO, and bond the flat face firmly to the housing so the light vibration is actually felt. Message us on WhatsApp if you want to compare it with the M and L variants first.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Model: 0820 Coin Vibration motor
Type: Coin / flat ERM (eccentric rotating mass)
Diameter: approx 8 mm
Thickness: approx 2 mm
Rated Voltage: approx 3V DC
Operating Range: approx 2.5-3.5V DC
Current: approx 60-100 mA typical
Vibration Strength: Small variant — gentlest feedback in this family
Leads: Two thin solderable wires
Drive Method: Transistor or driver stage required, not direct GPIO
Typical Uses: Wearables, phone haptics, toys, alert feedback
| Category | Modules |
| Model no. | CVM-0820-S |
| Availability | In stock |
| In stock | 5 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the 0820 Coin Vibration motor (s)
What is a coin vibration motor used for?
Small physical buzzes for silent alerts and haptic feedback, the classic vibrating alert inside phones, smart bands, trackers and toys.
How do I connect it to an Arduino or ESP32?
Through a small transistor or MOSFET stage rather than a bare GPIO, with a flyback diode across the motor. One pin then switches the vibration on and off from your sketch.
Why pick the Small variant over M or L?
Its gentler vibration reads as a subtle notification tap rather than a strong alert, which suits close-to-body wearables and slim enclosures.
Will it run from small batteries?
Yes. It is rated about 3 V DC and runs from roughly 2.5 V to 3.5 V, so coin cells work for short bursts and a Li-ion rail works through a driver stage.
0820 Coin Vibration motor (s) এর দাম কত?
বর্তমান দাম পেজের ওপরে দেখা যাচ্ছে; Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিন, আজকের রেট জানিয়ে দেবো।
ফোনের মতো হালকা কম্পন চাইলে কোনটা নিবো?
Small ভ্যারিয়েন্ট। এর কম্পন খুব মৃদু, তাই স্মার্ট ব্যান্ড বা কার্ড ট্র্যাকারের মতো সূক্ষ্ম ফিডব্যাকে এটাই মানানসই; শক্তিশালী কম্পন লাগলে M বা L ভ্যারিয়েন্ট দেখুন।


