Skip to content
Resistors

Resistor 470k Ω

৳2

Resistor 470 kΩ for the quiet end of a circuit: amplifier input bias, LDR and photodiode dividers that react to dim light, and RC timers that stretch into seconds. Nearly half a megohm barely loads the node it sits on, which is why night lamps, darkness alarms and guitar pedal bias stages use it.

  1. 470 kΩ film resistor, ±5% tolerance
  2. 0.25 W at 70°C ambient, derate above
  3. Bands yellow-violet-yellow-gold
  4. Rated to 250 V
  5. Axial leads suit breadboard and 2.54 mm PCB grids

Keep high-impedance nodes clean; flux residue and a damp board surface leak enough at this value to upset your readings.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Resistance: 470 kΩ (470,000 Ω)

Tolerance: ±5%

Power Rating: 0.25 W (1/4 W) at 70°C ambient, derate above

Type: Film resistor, insulated epoxy coating

Temperature Coefficient: approx ±250 ppm/°C

Max Working Voltage: 250 V

Colour Bands: Yellow - Violet - Yellow - Gold

Package: Axial Through-Hole

Lead Diameter: approx 0.55 mm, pre-tinned

Lead Form: Straight axial, friendly to 2.54 mm breadboard and PCB grids

Body Size: approx 2.5 mm diameter × 6.5 mm length

Operating Temperature: -55°C to +155°C

Quantity: 1 piece per unit ordered

CategoryResistors
Model no.RES-470K-025W
AvailabilityIn stock
In stock100 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the Resistor 470k Ω

Why would I pick a 470 kΩ resistor?

For very high-impedance work: amplifier input bias, gain networks around op-amps, LDR or photodiode dividers that must react to dim light, and long RC delays.

What do the bands yellow-violet-yellow-gold mean?

Yellow is 4, violet is 7 and the second yellow multiplies by 10,000, so 47 × 10,000 = 470,000 Ω. Gold marks ±5%.

How does an LDR divider with 470 kΩ behave?

It becomes very sensitive in dim conditions, so a night lamp or darkness alarm triggers while light levels are still low.

Can surface leakage upset my readings?

At nearly half a megohm, yes. Flux residue and damp board surfaces form parallel paths, so keep high-impedance nodes clean and dry.

What do combinations of 470 kΩ give me?

Two in parallel give 235 kΩ and two in series give 940 kΩ, useful when you need a nearby value and do not have it.

What is the price of this resistor?

The current price is shown at the top of this page; if it says Contact for price, message us on WhatsApp for today's rate.