Skip to content
Sensors

Analog Turbidity Sensor

৳1990

The Analog Turbidity Sensor measures how cloudy water is, outputting an analog voltage that falls as suspended particles rise: roughly 4.5V in clear water, dropping toward 0V in dirty water.

It pairs a probe that sits in the water with a small driver board, and the analog output connects straight to an Arduino or ESP32 ADC pin. Aquarium filter monitoring, water-treatment demos and IoT water-quality loggers are the usual projects.

  • 5V supply, three wires from probe to board: signal, VCC and GND
  • Higher voltage means clearer water, so no library is needed to interpret it
  • Calibrate by dipping it into known samples such as clear, cloudy and muddy water and noting the voltages
  • Keep the sensing window clean; a dirty window reads as cloudy water

For Raspberry Pi logging, add an external ADC, since the Pi has no analog inputs.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Measurement: Suspended particles / water turbidity (clarity)

Output: Analog approx 0-4.5V DC, higher voltage = clearer water

Supply Voltage: 5V DC

Includes: Turbidity probe plus driver board

Probe Cable: 3 wires to the board - signal, VCC, GND (typical)

Works With: Arduino ADC, ESP32 ADC, external ADC for Raspberry Pi

Water Temp: room temperature water for best accuracy (typical)

Calibration: Map known clear, cloudy and muddy samples to voltage values

Applications: Aquarium monitoring, water treatment, IoT water quality logging

CategorySensors
Model no.TURB-ANALOG
AvailabilityIn stock
In stock3 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the Analog Turbidity Sensor

What is an analog turbidity sensor used for?
It measures the cloudiness of water caused by suspended particles, which is how aquarium keepers watch filter performance and how water-quality projects flag dirty or muddy water.
How do I read it with an Arduino?
Power the driver board from 5V, connect its analog output to a pin such as A0 and read it with analogRead() - the value sits high, near the 4.5V ceiling, in clear water and drops as the water gets cloudier.
What does the output voltage mean?
Higher voltage means clearer water and lower voltage means more suspended particles, so the raw number is already a usable clarity indicator before any conversion.
Can I use it with ESP32 or Raspberry Pi?
Yes - ESP32 boards read the analog line directly, and for Raspberry Pi you add an external ADC because the Pi has no analog inputs of its own.
What supply does it need?
A steady 5V DC rail; a noisy or sagging supply shifts the reading, so power it from the Arduino 5V regulator or a clean adapter rather than a weak battery.
Is it beginner friendly?
Yes, it behaves like a plain analog voltage source - dip the probe, watch the number move, then map a few known samples for calibration, all doable in a first afternoon.
How should I maintain the probe?
Wipe the sensing window clean and keep it out of hot or fouling water, because buildup on the window is the most common cause of drifting or stuck readings.
টার্বিডিটি সেন্সরের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন, ওখানেই আপডেটেড প্রাইস দেওয়া থাকে।
এটা কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে, সারা বাংলাদেশে হোম ডেলিভারি করা হয়।
পানির মান পরীক্ষায় কেনো করবো কেন?
পানিতে বসে থাকা কণার পরিমাণ অনুযায়ী ভোল্টেজ বদলায়, তাই অ্যাকোয়ারিয়াম, ফিল্টার বা পানির কোয়ালিটি লগিং প্রোজেক্টে এটা সহজেই কাজে লাগে।
আরডুইনোতে কিভাবে লাগাবো?
ড্রাইভার বোর্ডে 5V আর GND দিন, অ্যানালগ আউটপুট A0-তে লাগান, তারপর পরিষ্কার, ঘোলা আর কাদামাখা পানিতে রিডিং নিয়ে কোডে ম্যাপ করে নিন।
কোন প্রোজেক্টে ব্যবহার করা যায়?
অ্যাকোয়ারিয়াম ফিল্টার মনিটর, ওয়াটার ট্রিটমেন্ট মডেল বা IoT পানির মান স্টেশন — সাইন্স ফেয়ারের জন্যও দারুণ একটা সেন্সর।