Skip to content
Capacitors

Capacitor 16v 1000 uf

৳10

The Capacitor 16v 1000 uf is a bulk smoothing part: 1000 microfarads at 16V DC in a radial aluminum can, the value you place after a bridge rectifier or around a regulator when a rail needs real reserve. It steadies the input and output sides of power supplies and feeds motor stalls or radio transmit bursts without dragging the rest of the circuit down.

  1. 1000uF at approx ±20% tolerance, 16V DC
  2. Polarized: longer lead positive, stripe marks negative
  3. Approx 10 x 16 mm can, 5 mm lead spacing
  4. Rated -40°C to +105°C, 1000 hour load life

Let it charge through a regulator or a series resistance rather than straight across a stiff supply, the inrush current is worth taming. To order, WhatsApp us the quantity; cash on delivery, delivered anywhere in Bangladesh.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Capacitance: 1000uF (1000 microfarads)

Rated Voltage: 16V DC

Tolerance: approx ±20%

Type: Aluminum Electrolytic

Mounting: Radial Through-Hole

Polarity: Polarized — longer lead is positive, stripe marks negative

Lead Spacing: approx 5mm

Body Size: approx 10mm diameter x 16mm height (typical)

Temperature Range: -40°C to +105°C

Load Life: 1000 hours at rated temperature

Typical Uses: Bridge rectifier smoothing, regulator filtering, bulk decoupling

Soldering: Standard iron up to 350°C, brief contact only

CategoryCapacitors
Model no.CAP-1000UF-16V
AvailabilityIn stock
In stock62 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the Capacitor 16v 1000 uf

What is this 1000uF 16V capacitor used for?

Bulk smoothing. It flattens ripple after a bridge rectifier, stabilizes regulator input and output, and feeds sudden current bursts from motors or transmitters.

How do I connect it in a power supply or Arduino project?

Longer positive lead to the positive rail, striped lead to ground, placed close to the load. On a breadboard put it across the 5V and GND rails.

Is it compatible with 12V adapters and 5V Arduino rails?

Yes. 12V is within the 16V rating and 5V or 3.3V rails sit well inside it; just keep the working voltage at or below 16V including ripple peaks.

How is 1000uF different from a 100uF capacitor?

Ten times the stored charge. Use 1000uF for bulk smoothing on power rails and 100uF or smaller for fast local decoupling right beside individual ICs.

I am a beginner, is this a good first capacitor?

Yes. It teaches polarity and smoothing in one lesson and stays forgiving as long as you respect the voltage rating and the polarity marks.

Capacitor 16v 1000 uf এর দাম কত?

পেজের একদম উপরে বর্তমান দাম দেখানো আছে; Contact for price থাকলে WhatsApp-এ মেসেজ দিলে আজকের রেট জানিয়ে দেবো।