Skip to content
Tools & Accessories

CERAMIC Soldering Iron Bit-60W

৳120

The CERAMIC Soldering Iron Bit-60W is a replacement ceramic heating-element core for soldering irons in the 60W class, the part inside the handle that actually gets hot. When an iron stops heating, warms up slowly or only works when the lead is held at an angle, a failed element is the usual cause, and swapping it brings the iron back without buying a whole new one.

  1. Rated approx 60W at 220V AC for common 907/908 style mains irons
  2. Ceramic core reaches working temperature within a few minutes
  3. Fitted by opening the handle and swapping the element; basic repair skill is enough
  4. Match voltage, wattage and terminal layout with your old part before ordering

Unplug the iron and let it cool fully before opening the handle, and keep the old element beside you so the two wires go back exactly where they came from.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Type: Ceramic heating element core (soldering iron bit)

Rated Power: approx 60 W

Operating Voltage: 220V AC (typical for 907/908 style mains irons)

Heater Material: Ceramic core heating element

Heat-Up: Fast, reaches working temperature within a few minutes (typical)

Fits: Common 907/908 style 60W iron handles — verify against the old element

Installation: Open the handle, swap the element, reconnect the leads as per the old part

Applications: Repairing irons that fail to heat or heat intermittently

User Level: Basic repair skill; unplug the iron and work on a cool handle

Compatibility Check: Match voltage, wattage and terminal layout with the old element

Packaging: Single replacement element

CategoryTools & Accessories
Model no.BIT-CER-60W
AvailabilityIn stock
In stock1 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the CERAMIC Soldering Iron Bit-60W

How do I replace the heating element?

Unplug the iron and let it cool fully, open the handle, note where the two element wires connect, swap in the new ceramic core and reassemble. Keeping the old element beside you makes the wiring easy to match.

Will it fit my soldering iron?

It suits common 907/908 style 60W mains irons, but element sizes and terminal layouts vary between models, so compare the old part and your iron's markings before ordering.

Is it safe to replace it myself?

It is a mains-voltage part, so unplug the iron, work on a fully cooled handle and make sure no bare wire can touch the metal barrel. If you are unsure, let a repair technician fit it.

How do I confirm the old element is really dead?

With the iron unplugged, a multimeter continuity check across the element terminals usually shows an open circuit on a burnt element, while a healthy one reads a low resistance.

My iron heats only sometimes. Will this fix it?

Intermittent heating is a classic sign of a cracked element or a loose internal connection, so replacing the element and checking the lead connections usually solves it.

সিরামিক বিট কোথায় পাবো, কিভাবে অর্ডার করবো?

এই পেজ থেকেই অর্ডার করা যায়। সারা বাংলাদেশে কুরিয়ারে পৌঁছে যায়, ক্যাশ অন ডেলিভারিতে, আর চার্জ নিশ্চিত করে WhatsApp-এ জানিয়ে দেওয়া হয়।