Skip to content
Tools & Accessories

Double Sided FR-4 PCB Prototype Board 9x15cm

৳240

Double Sided FR-4 PCB Prototype Board 9x15cm is a large universal prototyping board with a 2.54mm pad-and-hole grid on both faces of 1.6mm FR-4 glass epoxy. Once a circuit has passed breadboard testing, this is where it becomes a soldered permanent build, and the 9 x 15cm area holds a whole project, microcontroller, driver and terminals together, with room to spare.

  • Double-sided copper pads let a trace cross to the other face through a hole
  • Standard 2.54mm grid accepts DIP ICs, headers, relay modules and screw terminals
  • Approx 1.0mm drilled holes with tinned 3mm pads that wet quickly
  • FR-4 base stays flat under repeated soldering heat

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategoryTools & Accessories
Model no.PCB-9X15
AvailabilityIn stock
In stock3 pcs
DeliveryCash on Delivery, nationwide Bangladesh
Board Size9 x 15cm (90 x 150mm)
SubstrateFR-4 glass epoxy, approx 1.6mm thick
Layersdouble-sided, copper foil on both faces
Pad Pitch2.54mm standard grid across the board
Hole Diameterapprox 1.0mm drilled holes
Hole Gridapprox 35 x 59 positions per face
Pad Diameterapprox 3mm annular pads
Platingtin-plated pads for easy solder wetting
Component FitDIP ICs, 2.54mm headers, screw terminals, TO-220 packages
Solderabilitystandard iron up to 350°C, quick wetting
Typical Usespermanent project boards, power supplies, robot controllers
Weightapprox 50-60g

Customer reviews

No reviews yet — be the first.

Questions about the Double Sided FR-4 PCB Prototype Board 9x15cm

What is a double-sided prototype board used for?
Turning a proven breadboard circuit into a soldered permanent build. You place parts on the 2.54mm grid and join them with solder bridges or wire links on either copper face.
How do I route a connection between the two sides?
Pass a component lead or a short piece of wire through a hole and solder it on both faces, so the trace crosses to the opposite layer like a via on a manufactured PCB.
Will Arduino modules and DIP chips fit the grid?
Yes. Every hole sits on a 2.54mm pitch, so Nano boards, female headers, DIP ICs, relay modules and screw terminals all align without forcing.
Can it carry power circuits?
For hobby-level loads such as a 12V supply or a motor driver, yes. Reinforce high-current pads with extra solder or bare wire bus bars, since 1mm holes limit very heavy current.
Pads lifted or a joint keeps failing. What went wrong?
An iron held too long above 350°C or repeated reheating pulls a pad off the FR-4. Work quickly, tin the pad first, and support heavy wires instead of stressing the copper.
বোর্ডটা কোথায় পাবো আর দাম কত?
এই পেজেই অর্ডার করা যায়। সর্বশেষ দাম পেজের ওপরে দেখানো আছে; 'Contact for price' লেখা থাকলে WhatsApp-এ মেসেজ দিয়ে রেট জেনে নিন।