Skip to content
Tools & Accessories

Hader pin strip

৳20

Hader pin strip is a 40-pin single-row male header on the standard 2.54mm pitch, the small part that makes a module reusable. Break off the length you need, solder it to a PCB or shield, and any sensor, display or driver board plugs straight in. The pins drop into breadboards, female jumper housings and Uno-style shields without forcing.

  • 40 positions per strip, snapping apart cleanly at any pin count
  • Tin-plated square brass posts, rated around 3A per pin
  • High-temperature plastic carrier survives hand soldering
  • Straight vertical mounting suits PCBs, shields and stack-ups

Keep a couple of strips in the drawer; a broken header on an Arduino or ESP32 board is a short repair with one.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategoryTools & Accessories
Model no.HPS-40
AvailabilityIn stock
In stock18 pcs
DeliveryCash on Delivery, nationwide Bangladesh
Positions40 pins per strip
Pitch2.54mm (0.1 in) standard grid
TypeMale header, single row, straight (vertical) mounting
Pin Profileapprox 0.64mm square brass post
PlatingTin-plated brass for fast solder wetting
Current Ratingapprox 3A per pin
InsulationHigh-temperature plastic carrier, flame retardant grade
SolderabilityHand solder with an iron up to 350°C, brief contact
PCB Drillapprox 1.0mm hole fits each pin
BreakableYes — strips separate cleanly at any pin position
Typical UsesSensor modules, custom PCBs, Arduino shields, Raspberry Pi HATs
Weightapprox 4-5g per strip

Customer reviews

No reviews yet — be the first.

Questions about the Hader pin strip

What is a header pin strip used for?
Soldering it onto a PCB or module so the board can plug into a breadboard, a female jumper lead or a mating socket, instead of carrying permanently attached wires.
How do I break the strip into shorter pieces?
Bend it over the edge of a table at the pin you want, or grip both sides of the plastic gap with pliers, and it snaps cleanly at that position without bending the posts.
Will it fit a breadboard and jumper wires?
Yes. The 2.54mm square posts slide into breadboard spring clips and standard female Dupont housings with a firm grip.
How much current can one pin carry?
Around 3A per pin is the practical ceiling. For motor or LED strip supplies, route power through several pins or a screw terminal rather than a single post.
How is this different from a female header?
The male strip has exposed pins pointing out of the board, while a female header has receptacles. Plug-in modules carry the male strip and the main board carries the female counterpart.
হেডার পিন স্ট্রিপ কোথায় পাবো?
এই পেজ থেকেই অর্ডার করুন। সারা বাংলাদেশে কুরিয়ারে পাঠানো হয়, ক্যাশ অন ডেলিভারিতে, আর চার্জ WhatsApp-এ নিশ্চিত করে জানিয়ে দেওয়া হয়।