Skip to content
Dev Boards

ESP8266 NodeMCU V2 (CH340)

Contact for price

The ESP8266 NodeMCU V2 (CH340) is a WiFi development board with the ESP8266 chip, 4 MB of flash and a CH340G USB-serial converter behind its micro-USB port.

One board covers both the logic and the networking: relays you switch from a phone, Blynk and MQTT sensor nodes, WiFi weather stations, small web servers. The CH340 is the budget USB chip; install its driver once on Windows and uploads behave exactly like the pricier CP2102 version. GPIO is 3.3 V logic, so keep 5 V signals off the pins.

  1. ESP8266 with 4 MB flash; Arduino IDE and NodeMCU Lua both supported
  2. CH340G USB-serial for programming over micro-USB
  3. 3.3 V logic; power comes from USB or the Vin pin
  4. Breadboard friendly 2.54 mm headers on both edges

Order from the cart or on WhatsApp; cash on delivery across Bangladesh.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

MCU: ESP8266

USB-Serial: CH340G

Flash: 4MB

Operating Voltage: 3.3V

CategoryDev Boards
Model no.NODEMCU-V2-CH340
AvailabilitySourced on request — ask for price & lead time
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the ESP8266 NodeMCU V2 (CH340)

What is the ESP8266 NodeMCU V2 (CH340) used for?

It is a WiFi board for IoT projects: relays you switch from a phone or web page, sensor data pushed to Blynk or MQTT, small web servers, WiFi clocks. One board does the microcontroller and the networking at once.

Does the CH340 chip matter?

CH340 is the USB-to-serial chip between your laptop and the ESP8266. Windows needs its driver installed once; after that, uploads behave exactly like the CP2102 version of the same board.

How do I program it the first time?

Install the CH340 driver, add the ESP8266 board package in the Arduino IDE, pick NodeMCU 1.0 and upload over micro-USB. The onboard USB serial handles flashing, so no separate programmer is needed.

Does it run at 3.3V or 5V?

The ESP8266 runs at 3.3 V logic and the board makes that from the 5 V USB supply itself. Power the board from USB or the Vin pin, and do not feed 5 V signals directly into its GPIO.

NodeMCU V2 আর V3 এর পার্থক্য কী?

বোর্ড আর স্কেচ প্রায় একই; মূল পার্থক্য USB-serial চিপ আর বোর্ডের আকার। V2 তে CH340, V3 তে CP2102, আর V3 একটু চওড়া। তাই দুটোর যেকোনোটাই একইভাবে কাজ করে।

সারা দেশে ডেলিভারি পাওয়া যাবে?

হ্যাঁ, সারা বাংলাদেশে ডেলিভারি করা হয়, ক্যাশ অন ডেলিভারিতে। কুরিয়ার চার্জ কত হবে সেটা অর্ডারের আগে WhatsApp-এ কনফার্ম করে জানিয়ে দেওয়া হয়।