Skip to content
Sensors

Formaldehyde/ Formalin Detection Sensor MS1100

৳1200

The Formaldehyde/ Formalin Detection Sensor MS1100 is a metal-oxide gas sensor element that reacts to formaldehyde and formalin vapour, and also to benzene, alcohol and other VOC fumes.

Indoor air-quality alarms, formalin-detection demos and exhaust-fan automation are the projects it is bought for: when fumes build up, its resistance shifts and an Arduino or ESP32 turns the shift into a reading, a bar graph or a relay click. A load resistor on the sensing side and a stable 5V on the heater side are all the support it needs, plus a few minutes of warm-up before the numbers settle.

  1. Sensitive down to roughly 0.02 ppm-level formaldehyde concentrations
  2. 5V heater at about 60mW, with a several-minute preheat
  3. Analog resistance output, read through a load resistor or via a breakout module
  4. 6-pin through-hole body fits standard sensor sockets

It is a qualitative detector: it shows change and trend well, but it is not a calibrated laboratory ppm meter.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Sensor Type: MS1100 metal-oxide-semiconductor (MOS) gas sensor

Target Gases: formaldehyde, formalin vapour, benzene, alcohol and VOCs

Detection Range: approx 0.02 - 3 ppm (formaldehyde)

Loop Voltage: up to 24 V DC, typically 5 V

Heater Voltage: 5.0 V DC ± 0.1 V

Heater Power: approx 60 mW

Sensitivity: high response to formaldehyde and VOC vapours

Output: analog resistance change, use with a load resistor or driver module

Warm-Up: several minutes heater preheat before readings settle

Mounting: 6-pin through-hole, fits standard sensor sockets

Operating Temperature: -10°C to +45°C, avoid condensation

Note: qualitative detector, not a calibrated laboratory ppm meter

CategorySensors
Model no.MS1100
AvailabilityOut of stock — request notify
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the Formaldehyde/ Formalin Detection Sensor MS1100

What does the MS1100 sensor detect?

Formaldehyde and formalin vapour in the air, and it also reacts to benzene, alcohol and other volatile organic fumes. It tells you that fumes are present and how the level is moving; it is a qualitative detector, not a certified laboratory ppm meter.

How do I wire the MS1100 to an Arduino?

The heater pins go across a stable 5V supply, and the sensing side reaches your ADC through a load resistor. The simplest path is the ready-made MS1100 breakout module, which includes the load resistor and gives you a clean analog or digital output pin.

Why do readings drift for the first few minutes?

The metal-oxide layer only works when hot. On power-up the heater needs several minutes to reach operating temperature, and a brand-new element benefits from an initial burn-in, so read values only after warm-up.

What else can falsely trigger it?

Perfume, mosquito spray, cigarette smoke, cooking vapour, alcohol and paint thinner all register on a MOS sensor, and high humidity shifts the baseline. Test in a ventilated spot and expect these cross-sensitivities.

How do I turn the analog value into an alarm?

Record a baseline reading in clean air, then compare each new reading against it in code and trigger a buzzer, LED or relay when a threshold you set is crossed. Treat it as relative change, since absolute ppm calibration is not practical with a raw element.

MS1100 ফরমালিন ডিটেকশন সেন্সরের দাম কত?

এই পেজের উপরেই সর্বশেষ দাম দেখানো থাকে; Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিয়ে আজকের রেট জেনে নিন।