
Laser Module 650NM 5V
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The Laser Module 650NM 5V emits a red 650nm dot from a 5mW-class diode, with the current limiting already on the little driver board and three pins (S, VCC, GND) for wiring from any 5V supply. Point it across a room at an LDR or photodiode and you have the beam half of a tripwire: intruder alarms, doorway object counters, levelling guides and physics speed demos.
- 650nm red, about 5mW class, continuous dot
- 5V DC, roughly 30mA
- Signal pin lets a microcontroller switch the beam on and off
- Several metres of indoor reach when paired with an LDR receiver
A laser dot in an eye does damage at any power level, so mount it below eye line and never aim it at people or mirrors.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Wavelength: 650 nm (red)
Operating Voltage: 5V DC
Operating Current: approx 30 mA
Output Power: approx 5 mW class laser
Beam: Continuous red dot output
Drive Circuit: Current-limited laser diode board
Pins: 3 (Signal S, VCC, GND)
Detection Distance: Several metres indoors when paired with an LDR receiver
Board Size: approx 18 x 10 mm
Body Material: PCB with brass diode housing
Compatible Boards: Arduino, ESP8266, ESP32, STM32, Raspberry Pi
Safety: Avoid direct eye exposure at all times
| Category | Modules |
| Model no. | LASER-650NM-5V |
| Availability | In stock |
| In stock | 7 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the Laser Module 650NM 5V
What is a 650nm 5V laser module used for?
It throws a straight red beam used as the transmitter in tripwire alarms, object counters, laser-tag targets, levelling guides and physics experiments that need a visible straight line.
How do I wire it to an Arduino?
Connect GND to ground and VCC to 5V for always-on operation, or leave VCC powered and switch the S signal pin from a digital output when you want the beam controlled in code.
Can I detect when someone crosses the beam?
Yes — place an LDR or photodiode at the far end, read it on an analog or digital input, and trigger your alarm when the value collapses because the beam was blocked.
Is it safe to use at home with children around?
Treat it like any laser: never aim at eyes, keep it below eye level, and add a shroud or a software timeout — at around 5 mW the risk comes from deliberate staring, not stray reflections.
How far does the beam work?
The dot stays tight across a normal room and beyond; with a good receiver an indoor tripwire of 5-10 metres is routine, though bright sunlight on the detector reduces the range.
Laser module vs IR beam breaker — which is better for an alarm?
The red 650 nm beam is visible, cheap and easy to align, while infrared is invisible to intruders but harder to aim; for learning and demos the red module is the better pick.
The dot looks dim or the module stopped working — why?
Check the supply really is 5V and the wiring order on the pins, avoid powering it from a weak 3.3V GPIO pin, and remember that continuous operation for many hours shortens diode life — duty-cycle it in code.
Laser Module 650NM 5V এর দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন — ওখানেই আপডেটেড প্রাইস থাকে।
অনলাইনে এটা কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে, অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারিতে পৌঁছে যাবে।
ট্রিপওয়্যার অ্যালার্মে এটা কী কাজে লাগে?
এক পাশে লেজার, অন্য পাশে LDR বসিয়ে বিম ভাঙলেই অ্যালার্ম চালু হয়ে যায় — দামি সেন্সর ছাড়াই পুরো ইনট্রুডার সিস্টেম দাঁড়িয়ে যায়।
Arduino-এর সাথে কিভাবে লাগাবো?
GND গ্রাউন্ডে, VCC 5V-তে দিন; কোড দিয়ে চালু-বন্ধ করতে চাইলে S পিন ডিজিটাল আউটপুটে জুড়ে HIGH-LOW করুন — কখনো চোখে তাক করবেন না।
নতুনদের জন্য কোন প্রোজেক্টে ব্যবহার করা সহজ?
LDR দিয়ে সিম্পল বিম-ব্রেক কাউন্টার বা ডোর অ্যালার্ম — মাত্র দুই মডিউল আর কয়েক লাইন কোডে কাজ করা প্রোজেক্ট তৈরি হয়ে যায়।


