
Load Cell 100g to 1Kg
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The Load Cell 100g to 1Kg is a straight-bar aluminum strain-gauge sensor that turns weight into a small electrical signal a microcontroller can read. Inside is a full Wheatstone bridge of strain gauges; load the bar and the bridge output shifts in proportion. Paired with an HX711 24-bit amplifier it resolves gram-level changes, which is how home-built kitchen scales, jewellery scales, propeller thrust rigs and hopper level sensors are made.
- Full Wheatstone bridge, four wires: E+, E-, A+, A-
- Sensitivity approx 1.0 mV/V, excitation approx 3-10V DC
- Capacity options from approx 100g up to 1kg, pick the range just above your heaviest load
- Bolt holes at both ends for a rigid frame mount
- Works with Arduino, ESP32 and Raspberry Pi through an HX711
Mount it firmly and load it only in the direction the bar is meant to bend, then calibrate the sketch with a known weight.
- Load Cell Arduino · লঞ্চ নিরাপত্তা মনিটর — ওজন, কাত আর পানির অ্যালার্ম
Sensor Type: Straight-bar aluminum strain-gauge load cell
Bridge: Full Wheatstone bridge (4 gauges)
Capacity Options: approx 100g to 1kg ranges
Sensitivity: approx 1.0 mV/V typical
Excitation: approx 3-10V DC (typical 5V from an HX711)
Wiring: 4 wires — E+, E-, A+, A-
Recommended Amplifier: HX711 24-bit ADC module
Material: Anodized aluminum alloy bar
Mounting: Bolt holes at both ends
Typical Uses: Digital scales, thrust measurement, hopper weight sensing
Overload Care: Do not exceed rated capacity or drop the bar
| Category | Modules |
| Model no. | LC-BAR-1KG |
| Availability | In stock |
| In stock | 1 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the Load Cell 100g to 1Kg
What is a load cell and how does it work?
It is a metal bar with strain gauges arranged in a Wheatstone bridge. Loading the bar flexes it by microscopic amounts, and the bridge output changes in proportion to the applied weight.
How do I connect it to an Arduino or ESP32?
Wire E+ and E- to the HX711 excitation pins and A+, A- to its signal pins, then read the HX711 from one clock and one data GPIO. The microcontroller never sees the load cell's tiny millivolt signal directly.
Which capacity should I choose?
Take the option just above your heaviest expected load: around 100g to 500g for jewellery or lab work, 1kg for kitchen scales, and higher ranges for thrust or hopper rigs.
Can I use it without an HX711 amplifier?
Not practically. The output is only around a millivolt per volt of excitation, so a precision amplifier or a 24-bit ADC is needed before readings become stable.
What ruins a load cell most often?
Overloading past the rated capacity, dropping it, or applying side loads. Mount it firmly, keep the force in the intended direction, and it reads consistently for years.
Load Cell 1Kg এর দাম কত?
সর্বশেষ দাম এই প্রোডাক্ট পেজের উপরে দেখুন। Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিলে আজকের রেট জানিয়ে দেওয়া হবে।

