Skip to content
Robotics

MG90S Metal Gear Micro Servo

৳0

Compact metal-gear servo with the same footprint as the SG90 but far more durable gearing for repeated-motion projects.

  • Torque: ~2.2kg-cm
  • Gear Type: Metal
  • Operating Voltage: 4.8-6V

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategoryRobotics
Model no.MG90S
AvailabilityOut of stock — request notify
DeliveryCash on Delivery, nationwide Bangladesh
Torque~2.2kg-cm
Gear TypeMetal
Operating Voltage4.8-6V

Questions about the MG90S Metal Gear Micro Servo

What is the MG90S Metal Gear Micro Servo used for?
The MG90S Metal Gear Micro Servo is a robotics component commonly used for building and driving robots, robotic arms, and other moving mechanisms.
Is the MG90S Metal Gear Micro Servo compatible with Arduino and ESP32?
Yes, the MG90S Metal Gear Micro Servo works with Arduino, ESP32, ESP8266, and most other microcontroller boards using standard digital, analog, I2C, SPI, or UART connections, depending on the module.
How do I connect the MG90S Metal Gear Micro Servo to my project?
Connect the power (VCC) and ground (GND) pins first, then wire the signal or data pin(s) to the appropriate digital, analog, or communication pins on your board, and install any required library before uploading your code.
MG90S Metal Gear Micro Servo কিভাবে ব্যবহার করবো?
MG90S Metal Gear Micro Servo টি রোবট, রোবোটিক আর্ম এবং অন্যান্য মুভিং মেকানিজম তৈরি করার জন্য ব্যবহার করা হয়। এটি সাধারণত Arduino বা ESP32 কোডের মাধ্যমে কন্ট্রোল করা হয়।
MG90S Metal Gear Micro Servo কেনো ব্যবহার করা হয়?
এই robotics component টি প্রজেক্টে নির্ভরযোগ্যভাবে ডেটা সংগ্রহ বা নির্দিষ্ট কাজ সম্পন্ন করার জন্য ব্যবহার করা হয়, যা ম্যানুয়ালি করা কঠিন বা অসম্ভব।
MG90S Metal Gear Micro Servo কোথায় পাওয়া যাবে এবং কিভাবে লাগাবো?
এটি Tekko-এর ওয়েবসাইট ও শোরুমে পাওয়া যাবে। লাগানোর জন্য প্রথমে VCC ও GND পিন সংযোগ করুন, এরপর সিগন্যাল/ডেটা পিনটি আপনার Arduino বা ESP32 বোর্ডের সঠিক পিনের সাথে যুক্ত করুন।