Skip to content
Modules

Neodymium magnets

৳35

Neodymium magnets are sintered NdFeB rare-earth discs and blocks, the strongest class of permanent magnet made. A coin-sized disc pulls several kilograms depending on size, which is why they end up in almost every build that needs real magnetic force from something small: hall sensor and reed switch triggers for Arduino projects, 3D-printed latches, tool walls, motor and generator experiments, science demos.

  • Sintered NdFeB, N35-N42 class
  • Ni-Cu-Ni triple plating against corrosion
  • Axially magnetized, poles on the two flat faces
  • Working temperature up to about 80°C; hotter than that weakens the magnet
  • Far stronger per size than ferrite magnets

Two cautions from experience. They are brittle: letting two discs snap together can chip them, so slide them apart rather than pulling. And keep them away from pacemakers, magnetic cards and hard drives.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Material: Sintered NdFeB (neodymium iron boron) rare earth

Grade: N35-N42 class super strength

Coating: Ni-Cu-Ni nickel triple plating

Magnetization: axial, poles on flat faces

Max Working Temperature: approx. 80 °C

Shapes/Sizes: common hobby discs and blocks, assorted sizes

Pull Force: several kilograms for coin-size discs, size dependent

Density: approx. 7.5 g/cm3

Curie Temperature: approx. 310 °C (do not approach)

Typical Uses: hall/reed sensor triggering, latches, holders, motor and science projects

Handling: brittle - avoid hard impacts and snapping magnets together

Safety: keep away from pacemakers, magnetic cards and hard drives

CategoryModules
Model no.NDMAG-N35
AvailabilityIn stock
In stock10 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the Neodymium magnets

Why are neodymium magnets stronger than normal magnets?
They are sintered rare-earth (NdFeB) material with far higher magnetic energy per volume, so the same size gives many times the pull of a ferrite magnet.
Can I use them with hall sensors on Arduino?
Yes - they are the ideal trigger for SS49E linear hall, KY-003 digital hall and reed switches; a small disc works from several millimetres away.
Do they lose strength over time or with heat?
At room temperature they keep their pull for decades, but above roughly 80 °C they begin to lose magnetization permanently, so keep them away from hot surfaces.
Will they rust?
The nickel plating protects them in normal use, but keep them dry - uncoated chips and scratches can oxidize, so a thin oil or tape layer helps in humid conditions.
Are they safe to handle?
With care - never let two snap together hard, they can chip or pinch skin, and keep them away from pacemakers, credit cards, watches and hard drives.
Can I cut or drill a magnet to size?
No - the sintered material is hard and brittle, and grinding it produces flammable dust; choose the right size instead.
What projects use them best?
Door and position sensing, magnetic latches, RPM measurement with a magnet on a shaft, tool holders, fridge-style attachments and physics demonstrations.
নিওডিমিয়াম ম্যাগনেটের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন, ওখানেই আপডেটেড প্রাইস দেওয়া থাকে।
অনলাইনে কোথায় কিনবো?
Tekko অনলাইন স্টোরে এটি স্টকে আছে - সারা বাংলাদেশে হোম ডেলিভারি সুবিধা সহ অর্ডার করতে পারবেন।
সেন্সর প্রজেক্টে এর কী কাজে লাগে?
হল বা রিড সুইচ ট্রিগার করার জন্য এর চেয়ে ভালো কিছু নেই - দরজা সেন্সর, RPM মাপা, পজিশন ডিটেকশনে ছোট এক টুকরা ম্যাগনেটই যথেষ্ট।
ব্যবহারের সময় কিভাবে সাবধান থাকবো?
দুটো ম্যাগনেট এমনি ছুড়ে মারবেন না - ধাক্কায় ভেঙে যেতে পারে ও আঙুল চাপা লাগতে পারে; পেসমেকার, কার্ড আর হার্ডড্রাইভ থেকে দূরে রাখুন।
সাধারণ ফেরাইট ম্যাগনেটের চেয়ে কেনো করবো কেন?
একই সাইজে এর টান অনেক গুণ বেশি, তাই ছোট জায়গায় শক্তিশালী ম্যাগনেটিক ইফেক্ট দরকার হলে নিওডিমিয়ামই লাগবে।