
0820 Coin Vibration motor (L)
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The 0820 coin vibration motor (L) is a flat pancake motor, about 8 mm across and 2 mm thick, that turns a 3 V supply into a haptic buzz. This is the Large variant, the one with the strongest vibration of the three, so it is the pick when the feedback has to be felt through a wristband or a closed case. Two thin wires come off the back for soldering to a coin cell holder, a Li-ion rail or a driver board.
- 8 mm diameter, roughly 2 mm thick, fits slim and curved housings
- Rated approx 3 V DC, happy anywhere from about 2.5 V to 3.5 V
- Draws around 60-100 mA while spinning
- Strongest buzz of the 0820 L/M/S variants
Drive it through a small transistor or driver stage, never straight from a GPIO pin, and put a flyback diode across the motor. Message us on WhatsApp if you want the M or S variant for gentler feedback instead.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Model: 0820 Coin Vibration motor
Type: Coin / flat ERM (eccentric rotating mass)
Diameter: approx 8 mm
Thickness: approx 2 mm
Rated Voltage: approx 3V DC
Operating Range: approx 2.5-3.5V DC
Current: approx 60-100 mA typical
Vibration Strength: Large variant — strongest in this family
Leads: Two thin solderable wires
Drive Method: Transistor or driver stage required, not direct GPIO
Typical Uses: Wearables, phone haptics, toys, alert feedback
| Category | Modules |
| Model no. | CVM-0820-L |
| Availability | In stock |
| In stock | 5 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the 0820 Coin Vibration motor (L)
What is a coin vibration motor used for?
It makes a short physical buzz for haptic feedback: phone-style notifications in wearables, alert cues in toys, confirmation taps in controllers and vibration cues in accessibility aids.
How do I connect it to an Arduino or ESP32?
Through a small NPN transistor or MOSFET: motor positive to 3 V, motor negative to the collector or drain, GPIO to the base or gate through a resistor, and a flyback diode across the motor.
Will it run from coin cells or a Li-ion supply?
Yes. It is rated about 3 V DC and runs from roughly 2.5 V to 3.5 V, so a coin cell holder, two AA cells or a regulated Li-ion rail all work for short bursts.
How strong is the Large variant compared with M and S?
It is the strongest buzz of the three 0820 variants. Pick it for wrist-worn or through-the-case feedback, and the M or S variants where a subtler touch is wanted.
0820 Coin Vibration motor (L) এর দাম কত?
বর্তমান দাম এই পেজের ওপরে দেখানো আছে; Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিন, আজকের রেট জানিয়ে দেবো।
সারা বাংলাদেশে ডেলিভারি করেন?
করি। ডেলিভারি হয় সারা দেশে, ক্যাশ অন ডেলিভারিতে; চার্জটা অর্ডারের আগে WhatsApp-এ জানিয়ে দেওয়া হয়।


