
Resistor 4.7k Ω
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The Resistor 4.7k Ω is a 4700 ohm film resistor, the pull-up value that makes I2C buses behave.
- Bands yellow-violet-red-gold: 4.7 kΩ at ±5%
- Film element, suited to pull-up and divider duty
- 0.25 W rating; across a 5V rail it dissipates barely 5 mW
- Axial through-hole leads seat firmly in standard breadboard holes
Sold per piece, so you can order exactly the number of pull-ups the bus needs.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Resistance: 4.7 kΩ (4700 Ω)
Tolerance: ±5%
Power Rating: 0.25 W (1/4 W) at 70°C ambient, derate linearly above
Type: Metal Film resistor, insulated epoxy coating
Temperature Coefficient: approx ±100 ppm/°C
Max Working Voltage: 250 V (power limited at this resistance)
Colour Bands: Yellow - Violet - Red - Gold
Package: Axial Through-Hole
Lead Diameter: approx 0.55 mm, pre-tinned copper-clad steel
Lead Form: Straight axial, bends easily to the 2.54 mm breadboard grid
Body Size: approx 2.5 mm diameter × 6.5 mm length
Operating Temperature: -55°C to +155°C
Quantity: 1 piece per unit ordered
| Category | Resistors |
| Model no. | RES-4K7-025W |
| Availability | In stock |
| In stock | 90 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the Resistor 4.7k Ω
Why choose 4.7 kΩ for I2C pull-ups?
It pulls SDA and SCL back to the rail quickly enough for 400 kHz fast-mode traffic and longer cables, where 10 kΩ edges start to look rounded.
How do I read the bands Yellow-Violet-Red-Gold?
Yellow is 4, violet is 7, red multiplies by 100 to give 4700 Ω, and gold marks the ±5% tolerance.
Can I use two 4.7 kΩ in parallel?
Yes, that gives 2.35 kΩ, a stronger pull-up for a heavily loaded bus. Two in series give 9.4 kΩ, close to the classic 10 kΩ.
How much voltage can it stand across itself?
At 0.25 W and 4700 Ω the safe continuous voltage is about 34 V. Across a 5 V rail it dissipates barely 5 mW.
What does ±5% tolerance mean in practice?
A 4.7 kΩ part may measure anywhere from 4.465 kΩ to 4.935 kΩ, which is far tighter than logic and pull-up circuits need.
Is it fine on a breadboard?
Yes. The 0.55 mm axial leads seat firmly in standard 2.54 mm breadboard holes without forcing.


