Skip to content
Capacitors

47 uf 50v Capacitor

৳16

The 47 uf 50v capacitor pairs the popular 47-microfarad value with a generous 50V rating, which is what 24V and 36V circuits, small amplifier supplies and relay drivers actually need. Where a 16V part would run close to its limit, this one keeps a wide margin, and the can still fits the same 2 mm lead-spacing footprint as its low-voltage sibling.

  • 47uF at approx ±20% tolerance, 50V DC
  • Used in amplifier supplies, relay and solenoid drivers, board repair
  • Polarized: longer lead positive, stripe marks negative
  • Approx 5 x 11 mm body, rated -40°C to +105°C

Using it on 5V or 12V is fine too, extra voltage headroom never hurts. Message Tekko on WhatsApp to order, cash on delivery nationwide.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategoryCapacitors
Model no.CAP-47UF-50V
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh
Capacitance47uF (47 microfarads)
Rated Voltage50V DC
Toleranceapprox ±20%
TypeAluminum Electrolytic
MountingRadial Through-Hole
PolarityPolarized — longer lead is positive, stripe marks negative
Lead Spacingapprox 2mm
Body Sizeapprox 5mm diameter x 11mm height (typical)
Temperature Range-40°C to +105°C
Load Life1000 hours at rated temperature
Surge Voltageapprox 63V
Typical Uses24V/36V rail filtering, amplifier supplies, relay and solenoid drivers, repair replacement

Customer reviews

No reviews yet — be the first.

Questions about the 47 uf 50v Capacitor

Why choose a 47uF 50V instead of a 47uF 16V?
Same capacitance. The 50V rating simply survives higher rails and unregulated supplies, and using it on a 12V or 5V circuit is fine too.
Can I use it in a 24V system?
Yes, 24V is comfortably within the 50V rating. That is exactly why this value shows up in relay drivers, LED drivers and industrial hobby projects.
Is the 50V version physically bigger?
Only marginally. The standard can stays around 5 x 11 mm with 2 mm lead spacing, so it usually drops into the same footprint as lower-voltage parts.
Can I put two in parallel or series?
Parallel adds capacitance, 2 x 47uF = 94uF at 50V. Series halves the capacitance and only raises the voltage rating properly with balancing resistors, so parallel is the safe trick.
How do I check that a used one is still good?
Measure it with a capacitance meter. Beyond about ±20% of 47uF, or with visible bulging and leakage, replace the part.
47 uf 50v ক্যাপাসিটরের দাম কত?
পেজের উপরেই সর্বশেষ দাম দেখানো আছে; Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিয়ে আজকের রেট নিন।