Skip to content
Capacitors

470uf 16v Capacitor

৳16

The 470uf 16v capacitor is the local reservoir for a 5V, 9V or 12V board that needs a bigger buffer than a 100uF part can give. Servos jerking on a robotic arm, GSM and Wi-Fi modules pulling transmit bursts and DC motors starting under load all dent the rail for a few milliseconds; 470 microfarads absorbs those dips before the microcontroller browns out and resets. It cures a lot of reset-loop complaints on Arduino and ESP boards with one cheap solder job.

  • 470uF at approx ±20% tolerance, 16V DC
  • Polarized: longer lead positive, stripe marks negative
  • Approx 8 x 11.5 mm body, 3.5 mm lead spacing
  • Rated -40°C to +105°C, 1000 hour load life

One caution: on an adapter that holds the full 12V with ripple on top, step up to a 25V-rated part for extra margin. WhatsApp us the quantity and we ship nationwide, cash on delivery.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Capacitance: 470uF (470 microfarads)

Rated Voltage: 16V DC

Tolerance: approx ±20%

Type: Aluminum Electrolytic

Mounting: Radial Through-Hole

Polarity: Polarized — longer lead is positive, stripe marks negative

Lead Spacing: approx 3.5mm

Body Size: approx 8mm diameter x 11.5mm height (typical)

Temperature Range: -40°C to +105°C

Load Life: 1000 hours at rated temperature

Typical Uses: 5V-12V rail buffering, servo and motor decoupling, regulator output filtering

Soldering: Standard iron up to 350°C, brief contact only

CategoryCapacitors
Model no.CAP-470UF-16V
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 470uf 16v Capacitor

What is this 470uF 16V capacitor used for?
It is a mid-bulk reservoir for 5V, 9V and 12V rails — it feeds servos, motors, GSM and Wi-Fi modules through their short current bursts and keeps regulators from dipping when the load steps suddenly.
How do I connect it in an Arduino or ESP32 project?
Solder the longer positive lead to the 5V or VIN rail and the striped lead to ground, placing it as close as possible to the load that draws the bursts, such as the servo header or the radio module pin.
Is a 16V rating safe on a 12V adapter?
12V is inside the 16V rating but close to it once ripple is added, so for a hard-worked 12V adapter supply a 25V part is the smarter pick; on 9V and 5V rails the 16V rating has comfortable headroom.
Does a beginner need anything special to use it?
No — one moment of polarity checking is all it takes, and the through-hole leads solder or breadboard-mount like any other radial electrolytic.
How is 470uF different from a 1000uF capacitor?
1000uF suits heavy bulk smoothing after a bridge rectifier; 470uF is the lighter, more compact choice for local buffering beside loads, and it saves board space on crowded PCBs.
How long does it last and how do I spot a failing one?
Thousands of hours at moderate temperature is normal; look for a bulged top, electrolyte residue near the base, or rails that sag only when motors start — all signs the capacitance has faded.
Where does it fit in ripple smoothing?
Place it after the regulator or at the load end — it charges between ripple cycles and discharges into the dips, cutting residual hum on audio boards and reset-causing dips on logic rails.
470uf 16v ক্যাপাসিটরের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন — সিঙ্গেল ও প্যাক প্রাইস ওখানে আপডেট থাকে।
এটা কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে, অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারি সুবিধা পাবেন।
রোবট আর IoT প্রোজেক্টে এটা কী কাজে লাগে, কেনো করবো?
সার্ভো, মোটর আর GSM/Wi-Fi মডিউলের কারেন্ট বার্স্ট শুঁকে নিয়ে রেইল স্থির রাখে — ESP বা Arduino রিসেট হওয়ার সমস্যা এক পিসেই মিটে যায়।
সার্ভো মোটরের পাশে কিভাবে লাগাবো?
লম্বা লিড সার্ভোর ভোল্টেজ রেইলে, দাগের লিড গ্রাউন্ডে লাগান — মোটরের যত কাছে সম্ভব; দরকার হলে 470uF-এর সাথে একটা 0.1uF সিরামিক জুড়ে দিন।
নতুনদের জন্য উপযুক্ত কি, কোন প্রোজেক্টে ব্যবহার করা যায়?
একদম উপযুক্ত — সার্ভো-চালিত রোবট আর্ম, লাইভ ওয়েদার স্টেশন বা Wi-Fi সুইচের পাওয়ার রেইলে বসিয়ে ব্রাউনআউট সমস্যা হাতে-কলমে শেখা যায়।