
Tools & Accessories
AA Battery Holder 4S
৳60
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
AA Battery Holder 4S is a moulded box that holds four AA cells in series and gives you one tidy supply on a single pair of leads: roughly 6V with alkaline cells or about 4.8V with NiMH rechargeables. Cells are not included. Red lead to positive, black to ground, and the project is running.
- Comfortable for around 1A hobby loads
- Nickel-plated springs keep contact through knocks and travel
- Moulded polarity markings stop reversed cell insertion
- Screw holes fix it to a chassis or inside a project box
Spare AAs are on sale at every corner shop in Bangladesh, and there are no lithium charging rules to think about, which is why this box is the usual first power supply for a school project.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
| Category | Tools & Accessories |
| Model no. | BH-AA-4S |
| Availability | In stock |
| In stock | 8 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
| Cells Held | 4 x AA (cells not included) |
| Configuration | series (4S) |
| Output Voltage | approx 6V with 1.5V alkaline cells, approx 4.8V with 1.2V NiMH |
| Contact Material | nickel-plated spring steel |
| Body Material | ABS plastic |
| Output Leads | red (+) and black (-), approx 15cm |
| Cell Insertion | side-by-side snap-in slots with end springs |
| Mounting | screw holes on holder base |
| Current Handling | comfortable for approx 1A hobby loads |
| Typical Uses | Arduino VIN feed, breadboard experiments, school projects, small robots |
| Safety Note | remove dead cells promptly to avoid spring corrosion |
| Weight | approx 20-25g |
Customer reviews
No reviews yet — be the first.
Questions about the AA Battery Holder 4S
What does an AA Battery Holder 4S do?
It wires four AA cells in series so their voltages add up, giving one portable supply on a single pair of leads instead of four loose cells taped together.
How do I connect it to an Arduino?
Black lead to GND, red lead to the VIN pin or a 2.1mm barrel plug. Four fresh alkalines at 6V sit comfortably inside the onboard regulator's input range.
Which AA cells work in it?
Standard alkaline, carbon-zinc and NiMH rechargeables all fit. A NiMH set gives about 4.8V total, which still powers most 5V boards through VIN.
AA holder or 18650 holder, which should I pick?
AAs for simplicity, since spares are everywhere and there are no lithium charging rules. 18650s when a build needs more capacity per cell or a higher voltage ceiling.
Do you deliver outside Dhaka?
Yes, we deliver across Bangladesh with Cash on Delivery, and the courier charge is confirmed on WhatsApp before you order.
The contacts corroded or the board resets randomly. Why?
Leaking cells and tired springs cause both. Clean the contacts with isopropyl alcohol, stretch weak springs slightly, and take spent cells out before storage.


