Skip to content
Modules

AC/DC Power Adapter 12V 2A

৳380

The AC/DC Power Adapter 12V 2A is a regulated switching supply that turns 100-240V AC mains into clean 12V DC at up to 2A, 24W at the plug. It is the standard wall supply for an Arduino or ESP32 bench, and the same barrel plug runs routers, LED strips, CCTV cameras and breadboard power modules.

  • Regulated 12V DC output, up to 2A / 24W
  • 100-240V AC input, 50/60Hz, fine on Bangladesh mains
  • 5.5 x 2.1mm centre-positive barrel plug on a lead about 1m long
  • Overload, short-circuit and over-temperature protection, with a power LED on the body

Order it together with a breadboard supply module and one adapter covers the whole bench.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Type: AC/DC switching power adapter (wall plug)

Input Voltage: 100 - 240 V AC, 50/60 Hz

Output Voltage: 12 V DC regulated

Output Current: up to 2 A

Output Power: 24 W max

Plug: 5.5 mm x 2.1 mm barrel, centre positive

Lead Length: approx. 1 m

Protections: overload, short circuit and over-temperature

Ripple: low regulated output, suitable for electronics and microcontrollers

Indicator: power LED on the body

Typical Uses: Arduino/ESP32 bench power, routers, LED strips, CCTV, project enclosures

CategoryModules
Model no.PSU-12V-2A
AvailabilityIn stock
In stock7 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the AC/DC Power Adapter 12V 2A

What devices can this 12V 2A adapter power?
Anything designed for 12 V DC up to 2 A - Arduino and ESP32 projects through a DC jack, routers, CCTV cameras, LED strips, small displays and breadboard power modules that accept 12 V input.
What does centre-positive mean for the plug?
The inner pin of the 5.5 x 2.1 mm barrel carries positive and the outer sleeve is negative, which is the standard Arduino and router convention - confirm with a multimeter before connecting anything unusual.
Is 2 A the exact current my device will get?
No, 2 A is the maximum available; the device draws what it needs, so a 300 mA sensor hub works fine as long as the total stays under 2 A, which leaves comfortable headroom for spikes.
Can I run LED strips with it?
Yes, roughly 5 A-meters of standard 12 V LED strip at full brightness - beyond that the strip dims because the adapter is maxed out, so split longer runs onto a bigger supply.
Is it safe to leave powered all day?
Yes, the switching design runs cool under normal load and the internal protection handles overload, short circuit and overheating; still, keep it ventilated rather than buried under cloth.
Will a 9 V device be damaged if I use this by mistake?
Yes - 12 V on a 9 V device can burn it out instantly, so always match the voltage exactly and only vary the current rating upward.
Why does my project reset when motors start?
Motors and relays drag the rail down at switch-on; add a large capacitor across your project's supply, or power motors from a separate adapter and join only the grounds.
12V 2A পাওয়ার অ্যাডাপ্টারের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন - Tekko-তে সেরা দামে পেজে আপডেটেড প্রাইস দেওয়া থাকে।
অনলাইনে 12V অ্যাডাপ্টার কোথায় কিনবো?
Tekko অনলাইন স্টোরে স্টকে আছে, অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারিতে বাসায় পৌঁছে যাবে।
Arduino বা রাউটার চালাতে এটা কী কাজে লাগে?
পরিষ্কার রেগুলেটেড 12V দেয় বলে Arduino, ESP32, রাউটার, CCTV বা LED স্ট্রিপ - ব্যাটারির ঝামেলা ছাড়াই দিনভর নিরবচ্ছিন্ন চলে এমন সব যন্ত্র এই এক অ্যাডাপ্টারেই।
প্রজেক্টের সাথে কিভাবে লাগাবো?
5.5x2.1mm প্লাগটা প্রজেক্টের DC জ্যাকে লাগান বা তার কেটে পজিটিভ-নেগেটিভ চিনে সোল্ডার করুন - প্লাগের ভেতরের পিন পজিটিভ, বাইরের অংশ নেগেটিভ মনে রাখবেন।
লোকাল মার্কেটের সস্তা অ্যাডাপ্টারের চেয়ে ভালো কেন?
সস্তা অ্যাডাপ্টারে ভোল্টেজ ওঠানামা করে মাইক্রোকন্ট্রোলার রিসেট দেয়, আর এটাতে রেগুলেশন আর শর্ট-সার্কিট প্রোটেকশন থাকায় প্রজেক্ট নিরাপদে দিন-রাত চলে।