Skip to content
Modules

Breadboard Power Supply Module 3.3V 5V

৳100

The Breadboard Power Supply Module 3.3V 5V (MB102) plugs straight onto the rails of a standard 830-point or 400-point breadboard and turns one DC adapter into two independent rails, each jumper-selectable to OFF, 3.3V or 5V. Run a 5V sensor bank on one side and a 3.3V board on the other at the same time, with an LED showing which rail is live.

  • Input 6.5-12V DC through a 5.5 x 2.1mm centre-positive jack, or via the header pins
  • Onboard LDO regulators for 3.3V and 5V, about 700mA total depending on input and airflow
  • USB-A port gives a 5V output for small boards
  • Independent jumper per rail, LED indicator per rail

Order one with a breadboard and the battery-pack juggling in the lab stops for good.

এই part দিয়ে project — কেনার আগে ফ্রি চালিয়ে দেখো:Tekko Sim — free circuit & Arduino simulator

Module: breadboard power supply (MB102 class)

Input Voltage: 6.5 - 12 V DC via barrel jack or header pins

Barrel Jack Size: 5.5 mm x 2.1 mm, centre positive

Output Rails: 2 independent rails, each selectable OFF / 3.3 V / 5 V by jumper

Regulators: onboard fixed LDO regulators for 3.3 V and 5 V

Max Output Current: approx. 700 mA total (depends on input and heatsinking)

USB Output: 5 V on a USB-A port

Indicators: LED on each output rail

Fits: 830-point and 400-point standard breadboards

Power Connectors: two jumper headers control rail voltages independently

CategoryModules
Model no.MB102
AvailabilityIn stock
In stock1 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the Breadboard Power Supply Module 3.3V 5V

How does this breadboard power module work?
It straddles the two power rails of a breadboard, takes 6.5 - 12 V DC from an adapter and regulates it down to 3.3 V or 5 V, with a jumper on each rail deciding that rail's voltage.
How do I set the rail voltages?
Two black jumper caps sit on three-pin headers marked with OFF, 3V3 and 5V - move the cap onto the position you want for each rail independently, and the LED next to it lights when that rail is live.
What adapter should I use with it?
Any 6.5 - 12 V centre-positive adapter with a 5.5 x 2.1 mm plug - the common 9 V or 12 V wall adapters in Bangladesh work perfectly, and the module regulates them down for you.
Can it power an ESP32 and sensors together?
Yes, this is its best trick - run the ESP32 side at 3.3 V and 5 V sensors on the other rail at the same time, since each rail is regulated and selected separately.
Why does it get warm at higher loads?
The LDO regulators burn the difference between input and output as heat, so a 12 V input at heavy load warms them up; using a 7 - 9 V adapter keeps it cool and improves efficiency.
Can I power motors from it?
Small hobby servos occasionally, but DC motors inject electrical noise that resets microcontrollers - give motors their own supply and join only the grounds together.
Does the USB port charge my phone?
It outputs 5 V on the USB-A socket, but with roughly 700 mA available it tops up small devices and powers 5 V accessories; it is not a substitute for a proper phone charger.
ব্রেডবোর্ড পাওয়ার সাপ্লাই মডিউলের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন - Tekko-তে সেরা দামে পেজে আপডেটেড প্রাইস দেওয়া থাকে।
অনলাইনে এই মডিউল কোথায় কিনবো?
Tekko অনলাইন স্টোরে স্টকে আছে, অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারিতে বাসায় পৌঁছে যাবে।
ব্রেডবোর্ডে এটা কী কাজে লাগে?
অ্যাডাপ্টার থেকে পরিষ্কার 3.3V ও 5V রেইল বানিয়ে দেয়, তাই ব্যাটারি জোড়া-খোলার ঝামেলা ছাড়াই সারাদিন প্রোটোটাইপিং চালানো যায়।
কিভাবে লাগাবো বা ব্যবহার করবো?
মডিউলটা ব্রেডবোর্ডের দুই রেইলের মাথায় বসিয়ে দিন, 6.5-12V অ্যাডাপ্টার লাগান, তারপর দুই জাম্পার দিয়ে প্রতিটা রেইলের ভোল্টেজ OFF, 3.3V বা 5V বেছে নিন।
নতুন শিক্ষার্থীদের জন্য কেন দরকার?
ল্যাবে ব্যাটারি শেষ হওয়ার ভয় আর তার জোড়ার গোলমাল দুটোই শেষ - একটা মডিউলেই দুই ভোল্টেজ রেইল আর LED ইন্ডিকেটর, তাই প্রথম কিটেই এটা রাখা ভালো।