Skip to content
Dev Boards

Arduino Nano V3 (FTDI Chip)

Contact for price

The Arduino Nano V3 (FTDI Chip) is a breadboard-sized Arduino built on the ATmega328P, with the FT232RL USB-to-serial chip that installs cleanly on Windows, Linux and Mac.

It carries the same 32 KB flash and 5 V logic as an Uno, but the slim body plugs straight into a breadboard, which is why it ends up in sensor loggers, line-follower robots and any build where the enclosure is tight. Program it from the Arduino IDE over a mini-USB cable; the FTDI chip means one less driver hunt than the CH340 clones.

  • Microcontroller: ATmega328P, 32 KB flash
  • USB-serial: FTDI FT232RL
  • Operating voltage: 5 V
  • Breadboard friendly: pins on 2.54 mm pitch, mini-USB socket

Order from Tekko BD with cash on delivery, anywhere in Bangladesh.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Microcontroller: ATmega328P

USB-Serial: FTDI FT232RL

Operating Voltage: 5V

Flash Memory: 32KB

CategoryDev Boards
Model no.NANO-V3-FTDI
AvailabilitySourced on request — ask for price & lead time
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the Arduino Nano V3 (FTDI Chip)

What is the Arduino Nano V3 (FTDI Chip) used for?
The Arduino Nano V3 (FTDI Chip) is a development board commonly used for programming and running microcontroller-based electronics, IoT, and robotics projects.
Is the Arduino Nano V3 (FTDI Chip) compatible with Arduino and ESP32?
Yes, the Arduino Nano V3 (FTDI Chip) works with Arduino, ESP32, ESP8266, and most other microcontroller boards using standard digital, analog, I2C, SPI, or UART connections, depending on the module.
How do I connect the Arduino Nano V3 (FTDI Chip) to my project?
Connect the power (VCC) and ground (GND) pins first, then wire the signal or data pin(s) to the appropriate digital, analog, or communication pins on your board, and install any required library before uploading your code.
Arduino Nano V3 (FTDI Chip) কিভাবে ব্যবহার করবো?
Arduino Nano V3 (FTDI Chip) টি মাইক্রোকন্ট্রোলার ভিত্তিক ইলেকট্রনিক্স, IoT এবং রোবোটিক্স প্রজেক্ট তৈরি ও প্রোগ্রাম করার জন্য ব্যবহার করা হয়। এটি সাধারণত Arduino বা ESP32 কোডের মাধ্যমে কন্ট্রোল করা হয়।
Arduino Nano V3 (FTDI Chip) কেনো ব্যবহার করা হয়?
এই development board টি প্রজেক্টে নির্ভরযোগ্যভাবে ডেটা সংগ্রহ বা নির্দিষ্ট কাজ সম্পন্ন করার জন্য ব্যবহার করা হয়, যা ম্যানুয়ালি করা কঠিন বা অসম্ভব।
Arduino Nano V3 (FTDI Chip) কোথায় পাওয়া যাবে এবং কিভাবে লাগাবো?
এটি Tekko-এর ওয়েবসাইট ও শোরুমে পাওয়া যাবে। লাগানোর জন্য প্রথমে VCC ও GND পিন সংযোগ করুন, এরপর সিগন্যাল/ডেটা পিনটি আপনার Arduino বা ESP32 বোর্ডের সঠিক পিনের সাথে যুক্ত করুন।