Skip to content
Modules

CAN Bus Module (MCP2515)

৳0

SPI-controlled CAN bus controller and transceiver, used to interface microcontrollers with automotive and industrial CAN networks.

  • Interface: SPI to CAN
  • Protocol: CAN 2.0B
  • Operating Voltage: 5V

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategoryModules
Model no.MCP2515
AvailabilityOut of stock — request notify
DeliveryCash on Delivery, nationwide Bangladesh
InterfaceSPI to CAN
ProtocolCAN 2.0B
Operating Voltage5V

Questions about the CAN Bus Module (MCP2515)

What is the CAN Bus Module (MCP2515) used for?
The CAN Bus Module (MCP2515) is a module commonly used for adding a specific function — wireless communication, motor control, or power regulation — to a larger electronics project.
Is the CAN Bus Module (MCP2515) compatible with Arduino and ESP32?
Yes, the CAN Bus Module (MCP2515) works with Arduino, ESP32, ESP8266, and most other microcontroller boards using standard digital, analog, I2C, SPI, or UART connections, depending on the module.
How do I connect the CAN Bus Module (MCP2515) to my project?
Connect the power (VCC) and ground (GND) pins first, then wire the signal or data pin(s) to the appropriate digital, analog, or communication pins on your board, and install any required library before uploading your code.
CAN Bus Module (MCP2515) কিভাবে ব্যবহার করবো?
CAN Bus Module (MCP2515) টি একটি নির্দিষ্ট কাজ (ওয়্যারলেস কমিউনিকেশন, মোটর কন্ট্রোল, পাওয়ার রেগুলেশন) যোগ করার জন্য ব্যবহার করা হয়। এটি সাধারণত Arduino বা ESP32 কোডের মাধ্যমে কন্ট্রোল করা হয়।
CAN Bus Module (MCP2515) কেনো ব্যবহার করা হয়?
এই module টি প্রজেক্টে নির্ভরযোগ্যভাবে ডেটা সংগ্রহ বা নির্দিষ্ট কাজ সম্পন্ন করার জন্য ব্যবহার করা হয়, যা ম্যানুয়ালি করা কঠিন বা অসম্ভব।
CAN Bus Module (MCP2515) কোথায় পাওয়া যাবে এবং কিভাবে লাগাবো?
এটি Tekko-এর ওয়েবসাইট ও শোরুমে পাওয়া যাবে। লাগানোর জন্য প্রথমে VCC ও GND পিন সংযোগ করুন, এরপর সিগন্যাল/ডেটা পিনটি আপনার Arduino বা ESP32 বোর্ডের সঠিক পিনের সাথে যুক্ত করুন।