Skip to content
Dev Boards

ESP32-C3 SuperMini Development Board WiFi & Bluetooth

৳530

The ESP32-C3 SuperMini Development Board WiFi & Bluetooth is a thumb-sized ESP32-C3 board, about 22.5 x 18 mm, carrying 2.4 GHz WiFi and Bluetooth LE on one chip.

It goes where a full ESP32 DevKit is too wide: inside a wall switch, a matchbox-sized sensor box, a wearable, a battery logger that sleeps between readings. The single-core RISC-V processor clocks up to 160 MHz and runs Arduino sketches, MicroPython and ESP-IDF alike.

  1. ESP32-C3 single-core RISC-V at up to 160 MHz
  2. WiFi and Bluetooth LE together on one board
  3. About 4 MB flash, up to 13 usable GPIO at 3.3 V logic
  4. USB-C for both power and programming

First-flash tip: if no COM port appears, hold the BOOT button while plugging in the cable, then release and upload.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

MCU: ESP32-C3 (RISC-V single core)

Clock Speed: Up to 160 MHz

Wireless: 2.4 GHz Wi-Fi 802.11 b/g/n + Bluetooth LE

Flash Memory: approx 4 MB typical

USB Connector: USB-C

Logic Level: 3.3 V

GPIO: Up to 13 usable pins

Board Size: approx 22.5 x 18 mm

Programming: Arduino IDE (ESP32 core), MicroPython, ESP-IDF

Antenna: On-board PCB antenna

Power Supply: 5 V via USB-C, or 3.3 V rail from a regulator

Deep Sleep: Supported for battery projects

CategoryDev Boards
Model no.ESP32-C3-MINI
AvailabilityIn stock
In stock5 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the ESP32-C3 SuperMini Development Board WiFi & Bluetooth

How do I program it with the Arduino IDE?

Add the ESP32 board package from Boards Manager, pick an ESP32C3 Dev Module style entry, connect over USB-C, and if the port does not show up hold the BOOT button while plugging the cable in.

How is it different from a regular ESP32 DevKit?

The C3 uses a single RISC-V core with Bluetooth LE only and offers fewer pins, but the board is far smaller and typically draws less power, which suits compact and battery projects.

Can I use MicroPython or ESPHome on it?

Yes, the ESP32-C3 is supported by MicroPython, ESPHome and the ESP-IDF toolchain, so you can work in whichever environment you already know.

What power does it need?

Feed it 5 V through the USB-C connector, or power the 3.3 V rail directly from a regulator for battery builds. Every GPIO is 3.3 V logic only.

এই বোর্ড কী কাজে লাগে?

Wi-Fi আর Bluetooth LE একসাথে দরকার এমন IoT, হোম অটোমেশন বা ফোন-কানেক্টেড সেন্সর প্রজেক্টের জন্য বানানো, আর সাইজ এত ছোট যে প্রায় যেকোনো এনক্লোজারে বসে যায়।

অর্ডার করবো কিভাবে? ঢাকার বাইরে ডেলিভারি হয়?

এই পেজ থেকে সরাসরি অর্ডার করতে পারেন, অথবা WhatsApp-এ মেসেজ দিন। সারা বাংলাদেশে ডেলিভারি হয়, ক্যাশ অন ডেলিভারিতে; কুরিয়ার চার্জ অর্ডারের আগেই কনফার্ম করে জানিয়ে দেওয়া হয়।