Skip to content
Sensors

MC-38 Magnetic Switch Security Alarm Sensor for Home Door Window

৳170

The MC-38 is the classic wired reed switch for door and window alarms. A slim white ABS body hides a normally closed contact, and a second small piece holding the magnet sticks to the moving sash. While the door stays shut the magnet holds the contact closed; the moment it opens and the magnet moves away, the circuit breaks and your alarm panel or microcontroller knows that entry point opened. The contact is sealed, needs no power of its own and is rated for roughly a million switching cycles.

  1. Normally closed (NC) reed contact, opens when the magnet moves away
  2. Triggers at a gap of roughly 15-25 mm
  3. Contact rating up to 100 mA at 24 V DC, signal switching only
  4. Body about 63 x 15 x 13 mm, magnet piece about 40 x 15 x 13 mm
  5. Mounts with screws or adhesive pads on wood, metal or UPVC frames

Wire one on every door and window in series for a single protected loop, or give each its own input if you need to know which one opened. Indoor use, -10 to +55 °C, and it works with alarm panels, Arduino, ESP32, Raspberry Pi and GSM alarm modules.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Model: MC-38 wired magnetic door/window sensor

Switch Type: normally closed (NC) reed switch

Contact Rating: max 100 mA at 24 V DC (signal switching only)

Trigger Gap: contact opens at approx 15-25 mm separation

Lead Wires: 2-core flying leads, approx 25 cm per side

Housing Material: white ABS plastic

Sensor Body Size: approx 63 x 15 x 13 mm

Magnet Size: approx 40 x 15 x 13 mm

Mounting: screw holes plus double-sided adhesive pads

Service Life: approx 1 million switching cycles

Operating Temperature: -10°C to +55°C, indoor use

Compatible With: alarm panels, Arduino, ESP32, Raspberry Pi, GSM alarm modules

CategorySensors
Model no.MC-38
AvailabilityIn stock
In stock2 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the MC-38 Magnetic Switch Security Alarm Sensor for Home Door Window

What does an MC-38 magnetic switch sensor do?

It is a wired door and window open sensor. The switch body mounts on the frame and the magnet piece on the moving door; while they stay aligned the reed contact stays closed, and the moment the door opens the contact breaks.

How do I wire it to an alarm panel or Arduino?

The two wires are a polarity-free contact, not a powered device. On an alarm panel connect them into a zone loop; on an Arduino run one wire to GND and the other to a digital pin set as INPUT_PULLUP, and you read LOW while the door is shut and HIGH once it opens.

Why is it called a normally closed sensor?

MC-38 is normally closed: the nearby magnet holds the internal contact shut, and removing the field opens it. A cut or tampered wire also opens the loop, so failure and tampering both raise an alarm, which is why NC loops are preferred for security.

Can I connect several MC-38 sensors together on one input?

Yes. Wire them in series so any single door opening breaks the whole loop, and your panel reports the zone as opened. If you need to know exactly which door, give each sensor its own input pin.

How far apart can the sensor and magnet be?

The contact opens once the magnet is roughly 15-25 mm away, so mount the two pieces within about a centimetre of each other, aligned side by side, when the door is closed.

MC-38 সেন্সরের দাম কত?

এই পেজের ওপরে সর্বশেষ দাম দেওয়া আছে। Contact for price দেখালে WhatsApp-এ মেসেজ দিলে আজকের রেট জানিয়ে দেবো।