
TMP36 Temperature Sensor
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
Buy TMP36 Temperature Sensor at the best price in Bangladesh.
The TMP36 is Analog Devices' easy-mode analog temperature sensor: three legs, no external parts, and a voltage output that climbs 10mV for every degree Celsius, so one Arduino ADC read turns straight into a temperature. Where the LM35 needs a negative supply to read below zero, the TMP36 adds a 500mV offset, which is why it measures from -40°C to +125°C on a single positive supply - cold-chain projects, fridge and freezer logging, weather stations and motor-temperature checks all work without extra circuitry.
It draws under 50µA, so battery-powered data loggers barely notice it, and the TO-92 package drops straight into a breadboard beside the microcontroller. If your project list contains the words temperature and Arduino anywhere, this sensor earns its socket.
Key Features:
• Analog output scaled at 10mV per °C - reads directly on an ADC pin
• 750mV output at 25°C with a 500mV offset, so sub-zero readings need no negative rail
• Measures -40°C to +125°C in the classic TO-92 package
• Works from 2.7V to 5.5V - fine on 3.3V and 5V boards alike
• Under 50µA quiescent current keeps battery loggers alive longer
• No external components or calibration chips needed to get started
• Pairs naturally with Arduino, ESP32, STM32 and plain multimeter testing
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Type: analog temperature sensor (Analog Devices TMP36)
Supply Voltage: 2.7-5.5V DC
Scale Factor: 10mV per °C
Output at 25°C: 750mV (500mV offset + 10mV/°C x temperature)
Measuring Range: -40°C to +125°C
Accuracy: ±1°C typical at 25°C, ±2°C over the full range
Linearity: ±0.5°C typical
Package: TO-92, breadboard-friendly pin spacing
Quiescent Current: under 50µA
Self-Heating: minimal at low supply current
Pinout (flat face toward you): VCC, VOUT, GND
Typical Uses: weather stations, fridge/freezer logging, battery projects, school experiments
| Category | Sensors |
| Model no. | TMP36 |
| Availability | Out of stock — request notify |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the TMP36 Temperature Sensor
How is the TMP36 different from the LM35?
The TMP36 puts a 500mV offset on its output, so it reads below 0°C from a single positive supply; the LM35 outputs 10mV/°C with no offset and needs a negative rail for sub-zero temperatures.
How do I convert the output voltage to temperature?
Temperature in °C = (voltage in mV - 500) / 10, so a 750mV reading means 25°C; on an Arduino, read the pin and apply that formula with your ADC reference in mind.
Can I power it from an Arduino's 5V pin?
Yes - it accepts 2.7-5.5V, so the 5V or 3.3V rail both work; keep the supply stable because the output tracks supply noise a little.
What is the pinout?
With the flat face toward you and legs down: VCC on the left, VOUT in the middle, GND on the right - the same leg order as an LM35.
Is it accurate enough for a weather station?
About ±1°C typical at room temperature, which suits hobby weather logging, fridge monitoring and classroom experiments; precision metrology needs a calibrated digital probe instead.
How long a cable can I run on the output?
Short breadboard leads are trouble-free; for longer runs add a 0.1µF capacitor across the supply pins near the sensor and keep the output wire away from switching loads.
Is it waterproof - can I put it in a fridge?
The bare TO-92 is not waterproof - seal it inside heat-shrink or an epoxy sleeve for fridge, freezer or outdoor use, remembering the sleeve adds a little response lag.
TMP36 সেন্সরের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন - ওখানেই আপডেটেড প্রাইস দেওয়া থাকে।
এটা কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে; অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারি হয়।
প্রজেক্টে এটা কী কাজে লাগে?
ওয়েদার স্টেশন, ফ্রিজ-ফ্রিজার মনিটর, ব্যাটারি চালিত ডেটা লগার - যেখানেই ডিগ্রি সেলসিয়াস দরকার, ১০mV/°C আউটপুট পড়েই তাপমাত্রা বের করা যায়।
Arduino-র সাথে কিভাবে লাগাবো?
বাঁ পাশের পা VCC-তে, মাঝের পা A0-তে, ডান পাশের পা GND-তে দিন; রিডিংয়ের ভোল্টেজ থেকে ৫০০mV বাদ দিয়ে ১০ দিয়ে ভাগ করলেই সেলসিয়াস তাপমাত্রা পাবেন।
LM35-এর সাথে কোনটা নেবো?
শূন্যের নিচের তাপমাত্রাও (ফ্রিজ, শীতের বাইরের আবহাওয়া) মাপতে চাইলে TMP36 সুবিধাজনক - নেগেটিভ সাপ্লাই ছাড়াই -৪০°C পর্যন্ত পড়া যায়।


