Tekko BDSimSimulatorProjects

নিজে নিজে গাছে পানি দেওয়াAutomatic Plant Watering System using Arduino

Soil moisture sensor মাটি শুকনো কিনা Arduino কে জানায়; শুকনো হলে Arduino relay দিয়ে pump চালায়, মাটি ভিজলে থামায়।

A soil moisture sensor tells the Arduino when the soil is dry; the Arduino switches a relay that runs a small pump until the soil is wet again.

▶ ফ্রি চালিয়ে দেখো / Run it free Parts অর্ডার করো (WhatsApp)

যা যা লাগবে · Parts you need

তার লাগানো · Wiring

Soil moisture sensor VCC→Arduino Uno 5V
Soil moisture sensor GND→Arduino Uno GND
Soil moisture sensor AO→Arduino Uno A0
Relay module (5V, 1 channel) VCC→Arduino Uno 5V
Relay module (5V, 1 channel) GND→Arduino Uno GND
Relay module (5V, 1 channel) IN→Arduino Uno D7
Relay module (5V, 1 channel) COM→Arduino Uno 5V
Relay module (5V, 1 channel) NO→Mini water pump (3–6V) +
Mini water pump (3–6V) -→Arduino Uno GND.3

Code (Arduino C++)

// Dry soil gives a HIGH reading. Water until it is wet again.
const int soilPin = A0, relayPin = 7;

void setup() {
  pinMode(relayPin, OUTPUT);
  Serial.begin(9600);
}

void loop() {
  int dryness = analogRead(soilPin);
  Serial.println(dryness);
  if (dryness > 600) digitalWrite(relayPin, HIGH);   // pump ON
  else digitalWrite(relayPin, LOW);                  // pump OFF
  delay(500);
}

ভিডিও · Videos

Smart Irrigation System || Bangla || Arduino ProjectSmart Irrigation System Arduino | Automatic Plant watering System | Arduino Projects

আরো project · More projects