
Capacitors
22pf Ceramic Capacitor
৳6
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The 22pf ceramic capacitor is the classic crystal load part, the pair that sits on either side of a 16 MHz crystal next to an ATmega328. Nearly every bare MCU build, Arduino-compatible board and 8 MHz bootloader circuit calls for exactly this value, and leaving it out is the usual reason a homemade board refuses to start.
- 22pF (0.022 nF), 3-digit code 220, ±5% tolerance
- NP0 Class-1 dielectric, holds its value from -55°C to +125°C
- The standard load pair for 16 MHz and 8 MHz MCU crystals
- Rated 50V DC, non-polar, 2.5 mm lead spacing
One from each crystal pin to ground, and the oscillator starts the way it should. To order, message us on WhatsApp; cash on delivery available across Bangladesh.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
| Category | Capacitors |
| Model no. | CAP-22PF |
| Availability | In stock |
| In stock | 20 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
| Capacitance | 22 pF (0.022 nF) |
| Marking Code | 3-digit 220 |
| Dielectric | NP0 Class-1 ceramic |
| Tolerance | ±5% |
| Rated Voltage | 50V DC |
| Mounting | Through-hole disc |
| Lead Spacing | 2.5 mm |
| Lead Diameter | approx 0.55 mm, pre-tinned |
| Body Size | approx 5 mm diameter disc |
| Operating Temperature | -55°C to +125°C |
| Typical Use | Crystal load pair for 16 MHz / 8 MHz MCU oscillators |
| Polarity | Non-polarized |
| Quantity | 1 piece per unit ordered |
Customer reviews
No reviews yet — be the first.
Questions about the 22pf Ceramic Capacitor
What does a 22 pF capacitor do in an Arduino circuit?
It forms the crystal load network. One 22 pF from each crystal pin to ground lets a 16 MHz crystal start and oscillate at the right frequency on an ATmega328 or similar MCU.
What happens if I leave the load capacitors out?
The crystal may not start at all, the MCU can run erratically and the bootloader may fail. They are not optional.
Can I replace 22 pF with 33 pF or 18 pF?
In an emergency a nearby value often still oscillates, but frequency accuracy suffers. For bootloader or UART timing, stay with 22 pF.
Do the two capacitors need to match?
Ideally yes. Use the same grade and tolerance on both crystal pins so the load stays balanced.
How do I decode the printed code 220?
The first two digits (22) are the significant figures and the third (0) is the number of extra zeros, which gives 22 pF.
22 pf ক্যাপাসিটরের দাম কত?
পেজের উপরেই বর্তমান দাম দেখানো আছে; Contact for price থাকলে WhatsApp-এ মেসেজ দিলে আজকের রেট জানিয়ে দেবো।


