Skip to content
Capacitors

4.7 uf 50v Capacitor

৳16

The 4.7 uf 50v capacitor is a small-value electrolytic with headroom: 4.7 microfarads in a 50V can, meant for signal coupling, tone-shaping networks and bypass duty on rails hotter than a breadboard project. Guitar and audio hobbyists use it in passive tone controls and cathode-bypass positions, radio builders for inter-stage coupling, and it is the natural step when 2.2uF is slightly too small but 10uF is overkill.

  • 4.7uF at approx ±20% tolerance, 50V DC
  • Polarized: longer lead positive, stripe marks negative
  • Slim approx 5 x 11 mm body, 2 mm lead spacing
  • Rated -40°C to +105°C, 1000 hour load life

Amplifier and adapter boards carry a handful of these in small values, so repair benches buy them in bunches. To order, message us on WhatsApp; we deliver nationwide with cash on delivery.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Capacitance: 4.7uF (4.7 microfarads)

Rated Voltage: 50V DC

Tolerance: approx ±20%

Type: Aluminum Electrolytic

Mounting: Radial Through-Hole

Polarity: Polarized — longer lead is positive, stripe marks negative

Lead Spacing: approx 2mm

Body Size: approx 5mm diameter x 11mm height (typical)

Temperature Range: -40°C to +105°C

Load Life: 1000 hours at rated temperature

Leakage Current: very low at rated voltage

Typical Uses: inter-stage audio coupling, tone-control networks, cathode bypass, filtering on 24-36V rails

CategoryCapacitors
Model no.CAP-4.7UF-50V
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 4.7 uf 50v Capacitor

Where does a 4.7uF 50V capacitor typically go in a circuit?
In the signal path — coupling audio between stages, setting the corner frequency in tone networks, or bypassing a bias point — especially in stages powered from higher rails.
How is it different from a 10uF part?
With half the capacitance it sets a higher bass corner in coupling duty and times faster RC curves, while staying the same physical size — ideal when 10uF makes the response too heavy.
Can I use it in a 5V microcontroller circuit?
Yes, though on low-voltage rails a 16V version is cheaper; this 50V part earns its keep in 24V/36V audio, radio and repair work.
Which lead is positive?
The longer unmarked lead is positive; the can side with the printed stripe band is negative and must face ground or the lower voltage.
Is it polarized like bigger electrolytics?
Yes — reversing it degrades the oxide layer and can cause failure, so check orientation before soldering.
Can it replace a non-polarized film capacitor in tone circuits?
It works electrically at audio frequencies but adds leakage and aging; film capacitors remain the premium choice, while electrolytics win on size and cost.
How long does it last?
Around 1000 rated hours at maximum temperature and years at room conditions; replace it when tone, gain or hum behaviour drifts in an audio circuit.
4.7 uf 50v ক্যাপাসিটরের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন — ওখানেই আপডেটেড প্রাইস থাকে।
অনলাইনে এই ভ্যালুটা কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে; সারা বাংলাদেশে হোম ডেলিভারিতে পৌঁছে যায়।
অডিও আর রেডিও কাজে এটা কী কাজে লাগে?
দুই স্টেজের মাঝে অডিও সিগন্যাল কাপল করতে আর টোন কন্ট্রোল নেটওয়ার্ক বানাতে 4.7uF একটা সুনির্দিষ্ট সুইট-স্পট ভ্যালু — রিপেয়ার কাজেও বারবার লাগে।
বোর্ডে কিভাবে লাগাবো?
সিগন্যাল-পাথ কাপলিংয়ে + দিকটা আগের স্টেজের আউটপুটে আর দাগের দিকটা পরের স্টেজের বায়াসে বসান — পলারিটি ঠিক রাখলেই ক্লিন সাউন্ড পাবেন।
ছোট বডিগুলো নতুনদের বোঝা পড়ে কি?
মোটেও না — 5mm বডিটা ব্রেডবোর্ডেও সহজে বসে, আর প্রথেবোর্ডে কাপলিং আর ফিল্টারিং শেখার জন্য এটা দারুণ হালকা শুরু।