Skip to content
Capacitors

22uf 50v Capacitor

৳16

The 22uf 50v capacitor is a compact electrolytic with high-voltage manners: 22 microfarads wrapped in a 50V rating, made for coupling, tone networks and light filtering on rails that run well above hobby voltage. Signal builders place it between amplifier stages for DC blocking with a slightly tighter bass corner than a 47uF part, and repair techs meet it inside adapters and small SMPS boards running from 24V-class supplies.

  • 22uF at approx ±20% tolerance, 50V DC
  • Fits the same 2 mm lead-spacing footprint as the 16V sibling
  • Polarized: longer lead positive, stripe marks negative
  • Approx 5 x 11 mm body, rated -40°C to +105°C

Same value as the popular 16V can, just with the headroom to sit on a 24V or 36V rail without stress. Message us on WhatsApp to order, cash on delivery nationwide.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Capacitance: 22uF (22 microfarads)

Rated Voltage: 50V DC

Tolerance: approx ±20%

Type: Aluminum Electrolytic

Mounting: Radial Through-Hole

Polarity: Polarized — longer lead is positive, stripe marks negative

Lead Spacing: approx 2mm

Body Size: approx 5mm diameter x 11mm height (typical)

Temperature Range: -40°C to +105°C

Load Life: 1000 hours at rated temperature

Leakage Current: very low at rated voltage

Typical Uses: inter-stage coupling, tone and bias networks, light filtering on 24V/36V rails, board repair

CategoryCapacitors
Model no.CAP-22UF-50V
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 22uf 50v Capacitor

What is a 22uF 50V capacitor used for?
Signal and light-filter duty on higher-voltage boards — coupling audio between stages, shaping tone networks, bypassing bias points, and smoothing 24V/36V rails where a 16V part would be under-rated.
How is it different from a 22uF 16V capacitor?
Same capacitance, double the voltage margin — use the 50V version wherever the rail exceeds 16V or the supply is unregulated; on a 5V rail either works.
Can it replace a 47uF 50V in a repair?
It can in coupling and bias positions with a slightly higher bass corner, but not in reservoir duty — for real ripple filtering keep the original 47uF value.
Which lead is positive?
The longer unmarked lead; the printed stripe band marks the negative terminal, which must face ground or the lower potential.
Is it physically bigger than the 16V version?
No — the standard can stays about 5 x 11mm with the same 2mm lead spacing, so it is a drop-in where the footprint allows the height.
How do I verify a used one is still healthy?
Measure with a capacitance meter (within roughly ±20% of 22uF) and inspect for bulging or electrolyte residue; any drift beyond that warrants replacement.
Can beginners use it in their first amplifier project?
Yes — it is a forgiving part: mind the polarity, keep the rail under 50V, and it will quietly do its coupling job for years.
22uf 50v ক্যাপাসিটরের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন — ওখানেই আপডেটেড প্রাইস থাকে।
অনলাইনে এই ভ্যালুটা কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে; অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারি হয়।
হাই-ভোল্টেজ বোর্ডে এটা কী কাজে লাগে, কেনো করবো?
24V বা 36V রেলে কাপলিং আর ফিল্টারিং করতে 16V পার্ট ঝুঁকিপূর্ণ, তাই 50V রেটিংয়ের এই 22uF সেফ আর নির্ভরযোগ্য পছন্দ।
PCB-তে কিভাবে লাগাবো?
বোর্ডের + চিহ্নের হোলে লম্বা লিড, পাশের হোলে দাগের লিড বসিয়ে দ্রুত সোল্ডার করুন — পলারিটি উল্টালে পার্টটা নষ্ট হতে পারে।
অ্যাডাপ্টার বা অ্যামপ্লিফায়ার রিপেয়ারে কি এটা লাগবে?
হ্যাঁ — অনেক অ্যাডাপ্টার আর ছোট অ্যামপ্লিফায়ার বোর্ডেই 22uF 50V ক্যান থাকে, তাই রিপেয়ার স্টকে এই ভ্যালুটা কাজে লাগবেই।