Skip to content
Modules

5V DC Relay 5-Pin 10A

৳26

Buy 5V DC Relay 5-Pin 10A at the best price in Bangladesh.

This is the workhorse SRD-type 5V relay: a 5-pin SPDT contact set rated 10A at 250VAC or 30VDC, switched by a 5V coil you can drive from an Arduino, ESP32 or transistor stage. One click of this little sealed cube lets a microcontroller command a heater, pump, lamp, fan or a whole mains strip - the standard bridge between 3.3/5V logic and the bigger electrical world.

Use it bare on a PCB, in a matching socket, or as the heart of a relay board; the clear plastic cover lets you watch the armature work, and the printed pinout keeps COM, NO and NC wiring unambiguous. For any project that says switch something bigger than an LED, this is the part in the parts list.

Key Features:

• 5V DC coil switches a 10A SPDT contact set

• 5-pin layout: two coil pins plus COM, NO and NC

• Rated 10A at 250VAC and 10A at 30VDC for appliances, pumps and lighting

• Standard SRD footprint fits PCBs, sockets and relay boards

• Sealed dust cover with visible armature action

• Add a flyback diode across the coil when driving from logic

• The classic choice for Arduino home-automation and control projects

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Coil Voltage: 5V DC

Coil Resistance: approx 70Ω

Coil Current: approx 70mA (approx 0.36W coil power)

Contact Form: SPDT - 1 COM, 1 NO, 1 NC (5-pin package)

Contact Rating: 10A at 250VAC / 10A at 30VDC

Max Switching Voltage: 250VAC / 30VDC

Max Switching Current: 10A

Operate Time: approx 10ms; Release Time: approx 5ms

Mounting: PCB through-hole or matching relay socket

Cover: sealed dust-protected transparent cover

Typical Uses: Arduino/ESP32 load switching, home automation, pump and lamp control

CategoryModules
Model no.SRD-05VDC-SL-C
AvailabilityIn stock
In stock10 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 5V DC Relay 5-Pin 10A

What does "5-pin" mean on this relay?

Two pins feed the 5V coil and three pins are the SPDT contact set - COM (common), NO (normally open) and NC (normally closed) - so you can switch a load between two circuits.

Can an Arduino pin drive this relay directly?

The coil needs around 70mA, more than a safe Arduino pin should give - drive it through a transistor or use a relay module board that already includes the driver and flyback diode.

What loads can it switch?

Up to 10A at 250VAC - lamps, fans, small pumps and heaters within that limit; anything bigger needs a contactor, and inductive loads deserve derating or a snubber.

Which pins are which?

The case carries the printed layout: the two coil pins sit on one side (verify with an ohmmeter - about 70Ω), and COM/NO/NC follow the printed diagram; NO stays open until the coil energises.

Can I use it with an ESP32 (3.3V)?

The 5V coil wants a real 5V supply - drive the coil from 5V through a transistor whose base the ESP32 pin feeds, or simply use a relay module with a 3.3V-compatible input.

Do I need a diode across the coil?

Yes when a transistor switches the coil: the collapsing field produces a reverse-voltage spike that kills driver transistors, so a 1N4007-type flyback diode across the coil is standard practice.

Is it safe for mains wiring?

The contacts are rated 250VAC at 10A, but mains wiring must be insulated, fused and kept away from touchable parts - if you are not experienced with mains safety, switch low-voltage loads or get help.

এই রিলের দাম কত?

সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন - ওখানেই আপডেটেড প্রাইস দেওয়া থাকে।

অনলাইনে কোথায় পাবো?

Tekko অনলাইন স্টোরে স্টকে আছে; অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারি হয়।

Arduino দিয়ে লাইট-পাম্প চালাতে এটা কী কাজে লাগে?

মাইক্রোকন্ট্রোলারের ছোট 5V সিগন্যাল দিয়ে 10A পর্যন্ত লোড (লাইট, পাম্প, ফ্যান) চালু-বন্ধ করার সেতু - হোম অটোমেশনের প্রথম ধাপই এই রিলে।

কিভাবে লাগাবো?

দুই কয়েল পিনে 5V-GND (ট্রানজিস্টর বা রিলে মডিউলের মাধ্যমে), আর COM-NO/NC-তে লোডের তার - কয়েল চালু হলে COM-NO যুক্ত হয়ে লোড চালু হয়।

নতুনরা কি সাবধানে ব্যবহার করবে?

হ্যাঁ - 220V লাইনের কাজে ইনসুলেশন আর ফিউজ অবশ্যই রাখুন; নতুন হলে আগে 12V লোড দিয়ে প্র্যাকটিস করে হাত পাকানো ভালো।