Skip to content
Sensors

LM35 3-pin Temperature sensor

৳135

The LM35 (LM35DZ) is the classic analog temperature sensor that generations of engineering students have calibrated in the lab. It outputs a clean 10 mV for every degree Celsius, so a plain analogRead on an Arduino converts straight to temperature with almost no code, and the TO-92 package has just three pins: supply, output and ground. Use it for weather stations, room thermostats, soil and incubator monitoring, or any build where you want a temperature reading without digital buses or libraries.

  • 10 mV per degree Celsius linear output
  • TO-92, three pins: VCC, VOUT and GND
  • Measures 0 to 100 °C in the LM35D grade
  • About ±0.5 °C accuracy at 25 °C
  • 4 to 30 V supply, very low self-heating

No calibration is needed for basic use. For a lab-grade reading, average a dozen samples and keep the leads short.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategorySensors
Model no.LM35DZ
AvailabilityIn stock
In stock9 pcs
DeliveryCash on Delivery, nationwide Bangladesh
SensorLM35 precision analog temperature IC
PackageTO-92, 3 pins (VCC, VOUT, GND)
Measurement Range0 to 100 °C (LM35D grade)
Output Scale10 mV per °C linear
Accuracyapprox. +/-0.5 °C at 25 °C (typical)
Supply Voltage4 V to 30 V
Supply Currentunder 100 µA
Self-heatingapprox. 0.08 °C in still air
Output Impedancelow, drives ADC inputs directly
Arduino Reading0 - 1000 mV maps to 0 - 100 °C, fits the 1.1 V internal reference
Weightapprox. 1 g

Customer reviews

No reviews yet — be the first.

Questions about the LM35 3-pin Temperature sensor

What is the LM35 temperature sensor used for?
It converts ambient temperature into a proportional analog voltage, which suits room thermometers, weather stations, incubators and any microcontroller project that needs a temperature reading.
How do I wire the LM35 to an Arduino?
With the flat face toward you, the left pin goes to 5V, the middle pin to an analog input such as A0, and the right pin to GND. Read the voltage and multiply by 100 to get degrees Celsius.
Can the ESP32 read the LM35 directly?
Yes, but the ESP32 ADC is 3.3V limited and somewhat nonlinear, so power the sensor from 3.3V, keep readings under about 100 °C and average several samples for a stable value.
Why do my readings jitter or drift?
Long unshielded wires, a noisy supply and ADC noise all add error. Add a 0.1 µF capacitor from output to ground, average 10-20 samples and keep the leads short.
LM35 or DS18B20 - which should I choose?
Choose the LM35 for simple one-sensor analog projects with short wires, and the DS18B20 when you need multiple sensors, waterproof probes or long cable runs on one digital bus.
LM35 সেন্সরের দাম কত?
এই পেজের ওপরেই সর্বশেষ দাম দেওয়া আছে। Contact for price দেখালে WhatsApp-এ মেসেজ দিন, আজকের দাম জানিয়ে দেবো।