
LM393 Optical Motor Speed Measuring Groove Coupler Sensor Module
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The LM393 Optical Motor Speed Measuring Groove Coupler Sensor Module is a slot-type optical switch: an infrared LED on one side of the slot, a phototransistor on the other, and anything that passes through breaks the beam and produces a clean digital pulse. Fit a slotted encoder wheel to a motor shaft, count the pulses with an interrupt on an Arduino, ESP32 or STM32, and you have an RPM reading for fans, wheels, robots and DIY test rigs. The onboard LM393 comparator shapes the signal, so the output goes straight to a digital pin with no analog fiddling.
- Slot-type optical coupler, IR LED facing a phototransistor
- LM393 comparator, clean digital pulse output
- 3.3-5 V supply, output follows the logic level
- Three-pin interface for a digital or interrupt input
- Contactless, so nothing wears out at speed
RPM is pulses per second times 60 divided by the number of slots on your wheel. Mount the module so the wheel passes through the slot without rubbing.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Type: Slot-type (groove) optical coupler sensor
Comparator IC: LM393
Emitter: Infrared LED
Receiver: Phototransistor facing the LED across the slot
Output: Clean digital pulses when the beam is interrupted
Supply Voltage: 3.3-5 V DC
Pins: 3-pin output interface
Output Level: Follows the supply logic level
Reading Method: MCU interrupt pulse counting for RPM
Applications: Motor speed measurement, encoder wheels, object presence detection
Mounting: Through-hole breakout with fixing holes
| Category | Sensors |
| Model no. | LM393-SLOT |
| Availability | In stock |
| In stock | 3 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the LM393 Optical Motor Speed Measuring Groove Coupler Sensor Module
What does the groove coupler sensor do?
It detects when something passes through its slot. The IR beam between the LED and phototransistor is interrupted and the module outputs a digital pulse, which is how encoder wheels report rotation.
How do I measure motor RPM with it?
Fix a slotted encoder wheel to the shaft, feed the output to an interrupt-capable pin, count pulses per second, then multiply by 60 and divide by the number of slots on the wheel.
How do I wire it to an Arduino?
Connect VCC to 5V (or 3.3V), GND to ground and the digital output to any interrupt pin such as D2 on an Uno, then use attachInterrupt to count the edges.
Will it work with a 3.3V ESP32?
Yes. The module runs from 3.3-5V and its output follows the supply level, so ESP32, ESP8266 and STM32 boards read it directly.
Can it detect objects too, or only motor speed?
Yes. Anything opaque passing through the slot breaks the beam, so it also works as a slot-type presence, end-of-travel or paper-feed sensor.
এই মোটর স্পিড সেন্সরের দাম কত?
এই পেজেই সর্বশেষ দাম দেখানো আছে। Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিলে আজকের দাম জানা যাবে।


