
Load Cell 20kg with HX711 Amplifier
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
This is a 20 kg load cell with an HX711 amplifier board, the heavier sibling in the same weighing setup: strain gauge element, 24-bit ADC, two-wire connection to your microcontroller. It suits builds where the load runs past what a 10 kg cell should take, such as a shop counter scale, a platform scale for parcels, a force rig on a bicycle or a fill monitor on a drum. Wiring and code are the same as the smaller cells, so moving up in capacity does not mean rewriting the project.
- 20 kg capacity strain gauge load cell
- HX711 24-bit ADC amplifier board included
- SCK/DT two-wire interface to Arduino, ESP32 or similar
- Same wiring and libraries as the 5 kg and 10 kg versions
Mount it on a rigid base with the load straight through the element, tare with the platform empty, and calibrate with a known weight before you trust the numbers.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Capacity: 20kg
Amplifier: HX711 24-bit ADC
Interface: 2-wire (SCK/DT)
| Category | Sensors |
| Model no. | LOADCELL-20KG-HX711 |
| Availability | Sourced on request — ask for price & lead time |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the Load Cell 20kg with HX711 Amplifier
What is the difference between the 5 kg, 10 kg and 20 kg load cells?
Capacity only. The element and wiring are the same family and the HX711 code is identical, so you pick the rating that sits comfortably above your heaviest expected load.
How accurate is a DIY scale with this?
With a rigid mount, a stable supply and a careful calibration, gram-level resolution over a few kilograms is realistic. The mounting decides it more than the chip does.
How do I connect it to an ESP32?
Same as an Arduino: HX711 data and clock to two free GPIOs, power as your board supports, and the HX711 library handles the timing. Keep the wires short and the supply stable for clean readings.
Can it take force from any direction?
No. A load cell is built to be loaded one way, straight through the element, and tolerates little side force. Bolt it to a rigid base, keep the load vertical and centred, and protect it from sideways knocks.
Do I need the amplifier board?
Yes. The load cell's signal is far too small for a microcontroller ADC on its own, which is exactly why the HX711 comes in the set.
সারা বাংলাদেশে ডেলিভারি পাওয়া যাবে?
হ্যাঁ, সারা দেশে ডেলিভারি করা হয় এবং ক্যাশ অন ডেলিভারিতে পরিশোধ করা যায়। ডেলিভারি চার্জ কত হবে, অর্ডারের আগে WhatsApp-এ জানিয়ে নিন।


