Skip to content
Sensors

Load Cell 5kg with HX711 Amplifier

Contact for price

A 5 kg strain gauge load cell bundled with an HX711 amplifier, the smallest capacity in the set and the usual pick for a first weighing project. Four wires from the load cell land on the HX711, two wires from the HX711 land on your board, and the 24-bit ADC does the delicate work of turning microvolt changes into numbers your code can use. Kitchen scale builds, small parcel counting, ingredient dosing and hobby force rigs all start here.

  1. 5 kg capacity strain gauge load cell
  2. HX711 24-bit ADC amplifier board included
  3. Two-wire SCK/DT connection to an Arduino or ESP32
  4. Good first capacity for kitchen scales and small rigs

Tare the scale with the platform empty before every session and calibrate once with a known weight, then the reading stays honest.

এই part দিয়ে project — কেনার আগে ফ্রি চালিয়ে দেখো:
  • InfraPulse · ইনফ্রাপালস — ESP32 দিয়ে ব্রিজের স্ট্রেন ও কম্পন মনিটর
  • Weight scale: load cell + HX711 (tare and grams) · ওজন মাপার স্কেল: লোড সেল + HX711 (tare ও গ্রাম)
Tekko Sim — free circuit & Arduino simulator

Capacity: 5kg

Amplifier: HX711 24-bit ADC

Interface: 2-wire (SCK/DT)

CategorySensors
Model no.LOADCELL-5KG-HX711
AvailabilitySourced on request — ask for price & lead time
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the Load Cell 5kg with HX711 Amplifier

Is 5 kg the right capacity for a kitchen scale?

For a kitchen or ingredient scale, yes. Pick the 10 kg or 20 kg cell only if your loads regularly approach 5 kg, because running a load cell near its limit costs accuracy and safety margin.

How do I wire it up?

The load cell's four wires go to the HX711's screw terminals and the HX711 connects to your board with data, clock and power. Match the wire colours to your load cell's datasheet, they are not standardised between suppliers.

What resolution can I expect?

With a good mount and calibration, changes of a gram or two show up in the reading. The HX711 resolves far finer differences than the mechanical setup can hold steady, so the mounting matters more than the chip.

Why does the zero change between power-ups?

Temperature and mechanical settling move the zero point. Call tare with the platform empty at the start of every session, and give the rig a minute to settle after you move or handle it.

Can I read it with a Raspberry Pi?

Yes, the HX711 library exists for Python too. Wire the data and clock pins to GPIOs at 3.3V logic and it works the same as on an Arduino.

Do you deliver outside Dhaka?

Yes, we deliver across Bangladesh and orders can be paid as Cash on Delivery. The delivery charge is confirmed on WhatsApp before you order.