
MQ136 Gas Sensor Module Air quality CO Ammonia Benzene Alchohol Smoke Gas Sensing
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The MQ136 gas sensor module is built for toxic gas work: the semiconductor sensing layer reacts to hydrogen sulfide, ammonia, benzene, toluene and similar gases in the air. The board gives you two ways to use that. AO is an analog voltage that tracks concentration for an ADC pin, and DO is a digital output from an LM393 comparator whose trip point you set with the onboard potentiometer, so a buzzer alarm needs no code at all. Air quality monitor builders, environmental science students and farm or lab safety projects are the usual customers.
- Sensitive to hydrogen sulfide, ammonia, benzene and toluene
- AO analog output for ADC reading, DO digital output for alarm use
- LM393 comparator with potentiometer threshold
- 5V supply, approx 24 hours of burn-in for stable readings
- Board about 32 x 22 mm
Treat it as a trend and alarm sensor, not certified safety equipment, and keep alcohol sprays and wind away from it while measuring.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Sensor Type: MQ136 semiconductor gas sensor
Target Gases: Hydrogen sulfide, ammonia, benzene, toluene and other toxic gases
Operating Voltage: 5V DC (heater and circuit)
Outputs: AO analog output and DO digital output
Comparator: LM393 with onboard potentiometer for threshold setting
Load Resistance: required for the analog output (already onboard this module)
Preheat Time: approx 24 hours for stable readings (typical)
Board Size: approx 32 x 22 mm (typical)
Works With: Arduino ADC, ESP32 ADC, ESP8266 A0
Indicator LEDs: Power and comparator output indication (typical)
Applications: Air quality monitors, toxic gas alarms, farm and lab safety projects
| Category | Sensors |
| Model no. | MQ136 |
| Availability | In stock |
| In stock | 3 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the MQ136 Gas Sensor Module Air quality CO Ammonia Benzene Alchohol Smoke Gas Sensing
What is the MQ136 gas sensor module used for?
It detects toxic gases such as hydrogen sulfide, ammonia, benzene and toluene in ambient air, so it goes into air quality monitors, gas alarms and environmental monitoring projects.
How do I wire it to an Arduino?
VCC goes to 5V, GND to ground, AO to an analog input such as A0 and optionally DO to a digital pin. analogRead values climb as gas concentration rises.
Why are the readings unstable at first?
The heater element inside the sensor needs preheating. Expect drift in the first minutes of every power-up, and run roughly 24 hours of powered burn-in before you rely on the readings.
Can I use it with an ESP32 at 3.3V logic?
Yes, but power the heater from 5V because it needs that to work, and feed AO to the ESP32 ADC pin. The reading then spans a reduced range, which is usually enough for threshold detection.
How is the MQ136 different from MQ2 or MQ135?
MQ2 targets smoke and flammable gases, MQ135 is a general air quality sensor, and MQ136 is the pick when sulfur compounds, ammonia or benzene-type gases are the target. Choose by the gas you actually need to catch.
MQ136 সেন্সর মডিউলের দাম কত?
এই পেজের ওপরে সর্বশেষ দাম দেওয়া আছে। Contact for price দেখালে WhatsApp-এ মেসেজ করলে আজকের রেট জানিয়ে দেবো।


