Skip to content
Tools & Accessories

Soldering Wire 1.2mm Soldering Lead Rang Tin Lead Flux Rosin Core Solder Wire Low Melting Wire Diameter Optional Tin Lead Wire Reel

৳220

Rosin-cored tin-lead solder wire of about 1.2 mm diameter, wound on a reel. The rosin flux inside the core cleans the metal as you work, so most joints form properly without separate flux, and the alloy's low melting point around 180-190°C suits an ordinary 30 to 60W iron.

This is the everyday wire for through-hole PCB work, wire joints and general repair, and 1.2 mm is a forgiving diameter to learn on.

  • Approx. 1.2 mm diameter, rosin flux core
  • Tin-lead alloy, melts around 180-190°C
  • Feeds well on through-hole pads, wires and connectors
  • Contains lead: wash hands after use and keep it away from children

Keep the reel bagged when it is not in use, because dusty or oxidised wire makes dull joints.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategoryTools & Accessories
Model no.SW-1.2MM
AvailabilityIn stock
In stock1 pcs
DeliveryCash on Delivery, nationwide Bangladesh
Diameterapprox 1.2 mm
TypeTin-Lead (Sn-Pb) cored solder wire
Flux CoreRosin
Melting PointLow, approx 180-190°C for common tin-lead grades (typical)
FormWire wound on a reel
Diameter OptionsMultiple diameters available in this series
Recommended IronApprox 30-60 W soldering iron
WettingFlows fast with shiny joints on copper, tinned and plated surfaces
ApplicationsPCB soldering, wire joining, connector tinning, general repair
StorageKeep the reel sealed and dry to prevent oxidation
SafetyContains lead — wash hands after use and keep away from children

Customer reviews

No reviews yet — be the first.

Questions about the Soldering Wire 1.2mm Soldering Lead Rang Tin Lead Flux Rosin Core Solder Wire Low Melting Wire Diameter Optional Tin Lead Wire Reel

What is this solder wire used for?
It joins component leads, wires and pads by melting into the joint; the rosin core inside cleans the metal surfaces so the solder spreads and bonds properly.
How do I solder with it correctly?
Heat the joint with the iron for a second, then feed the wire into the joint rather than onto the tip, so the rosin flows over the metal and the solder wicks into the connection.
Should I choose 1.2mm or a thinner diameter?
Use 1.2 mm for through-hole boards, wires and connectors; pick 0.6-0.8 mm if you mostly work on fine SMD pads, where thick wire deposits too much solder at once.
What safety precautions should I follow?
Tin-lead solder contains lead, so wash your hands after soldering, keep the reel away from children and food, avoid breathing the flux smoke and work in a ventilated space.
How do I know if the solder quality is good?
Fresh rosin-cored wire melts quickly and leaves bright, shiny joints; dull or grainy joints usually point to oxidized wire, a dirty tip or too little heat rather than a bad reel.
এই সোল্ডারিং ওয়্যারের দাম কত?
বর্তমান দাম এই পেজের ওপরেই আছে; Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিয়ে আজকের রেট জেনে নিন।