Skip to content
Tools & Accessories

Universal 18650 Lithium Rechargeable Battery Charger

৳230

Universal 18650 lithium battery charger that plugs straight into a 220V wall socket and charges 3.7V li-ion cells on a CC/CV profile that ends at 4.2V. A spring-loaded sliding contact takes different cell lengths, so a 18650 sits firmly and shorter or longer cylinders such as 14500 or 26650 may fit too, depending on length.

Charge current is around 450-600 mA, which puts a 1200-2500 mAh cell at roughly 3-5 hours. An LED follows the progress and the charger cuts off by itself once the cell is full.

  • Input: 220V AC mains, two flat-pin plug
  • Charges 3.7V li-ion cells, 18650 typical
  • CC/CV profile with automatic cutoff at full charge
  • LED charging indicator, no buttons or settings to learn

Never charge a damaged or badly aged cell unattended, and keep the charger indoors and dry.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Input Voltage: 220V AC mains, two flat-pin plug

Charging Output: approx 4.2V DC cutoff, CC/CV lithium profile

Charge Current: approx 450-600mA typical

Indicator: LED shows charging status

Cell Compatibility: 3.7V cylindrical li-ion, 18650 typical; 14500/26650 may fit by length

Contacts: adjustable spring-loaded sliding rail

Charging Time: approx 3-5 hours for a 1200-2500mAH cell

Protection: automatic cutoff once the cell reaches full charge

Body Material: ABS plastic housing

Operating Temperature: 0°C to +40°C, indoor use only

Safety Note: never charge damaged or badly aged cells unattended

Weight: approx 60-80g

CategoryTools & Accessories
Model no.CHG-18650-UNI
AvailabilityIn stock
In stock2 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the Universal 18650 Lithium Rechargeable Battery Charger

What does this universal 18650 charger do?
It recharges 3.7V cylindrical li-ion cells with a controlled profile, cutting off at 4.2V so a battery reaches full charge without being overcharged.
How do I charge a battery with it?
Slide the cell in with its positive button toward the marked contact, plug the unit into a 220V socket, and wait for the indicator to show the charge is complete.
How long does a full charge take?
A typical 1200-2500mAH cell needs roughly 3-5 hours at the charger's standard current, and larger cells such as 26650 take correspondingly longer.
Can it charge any 3.7V lithium cell?
Healthy cylindrical cells in good condition are fine, but dented, leaking or badly aged batteries should never be charged, and button-top fit depends on the contact travel.
Is it beginner friendly?
Yes — there are no menus or current settings; insert the cell, plug in, and the LED does the talking, which makes it a stress-free first charger for students.
How is it different from a TP4056 module?
A TP4056 board charges a cell inside your project from a USB 5V source, while this finished unit is a standalone wall charger used on the bench between builds.
The LED never changes or the cell stays empty — what should I check?
Confirm the cell sits firmly on both contacts, try a second known-good battery, and if a cell still refuses to charge it has likely fallen below a safe voltage and should be retired.
Universal 18650 Lithium Rechargeable Battery Charger এর দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন — চার্জারের আপডেটেড প্রাইস ওখানে থাকে।
ঢাকার বাইরে এই চার্জার কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে, সারা বাংলাদেশে হোম ডেলিভারি করা হয়।
18650 সেলের জন্য এটা কেনো করবো কেন?
র‍্যান্ডম অ্যাডাপ্টারে চার্জ দিলে সেল নষ্ট হওয়ার ঝুঁকি থাকে, আর CC/CV প্রোফাইলে 4.2V-এ অটো কাট-অফ করা চার্জারই সেলের লাইফ ধরে রাখে।
ব্যাটারি কিভাবে লাগাবো চার্জারে?
স্প্রিং কন্টাক্ট টেনে সেল + চিহ্নের দিকে মিলিয়ে বসান, তারপর 220V সকেটে প্লাগ দিন — LED অবস্থা বদলালেই চার্জ শেষ বুঝবেন।
নতুন ব্যবহারকারীদের কী মনে রাখা দরকার?
ফোলা বা ক্ষতিগ্রস্ত সেল কখনো চার্জ করবেন না, চার্জের সময় কাছে থাকুন, আর সম্ভব হলে প্রোটেক্টেড সেল ব্যবহার করুন।