Skip to content
Tools & Accessories

Temperature Controlled Soldering Iron 907/908 with Regulator 60W 220V Adjustable 200-450°C

৳625

Temperature controlled soldering iron in the 907/908 handle style, 60W on 220V mains, with a regulator dial for roughly 200 to 450°C. A ceramic heater brings the tip to working heat within a few minutes, and the dial lets you drop the temperature for fine pads or raise it for terminals and ground planes that soak up heat.

Phone, laptop and TV repair benches run on this style of iron, and it suits students too since the control is a plain dial rather than a digital menu.

  • Approx. 60 W on 220V AC mains, no separate power supply needed
  • Adjustable approx. 200-450°C on the front dial
  • 907/908 handle, ceramic element, takes common 900M-style tips
  • Tip and barrel stay hot for minutes after use, so keep a stand under it

Start near 300-330°C for regular tin-lead solder and only go higher when a joint refuses to flow.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategoryTools & Accessories
Model no.SI-907-60W
AvailabilityIn stock
In stock1 pcs
DeliveryCash on Delivery, nationwide Bangladesh
Powerapprox 60 W
Input Voltage220V AC mains
Temperature Rangeapprox 200-450°C adjustable
Temperature ControlFront regulator dial
HeaterCeramic heating element
Handle Style907/908 type
Heat-Up TimeReaches working heat within a few minutes (typical)
TipAccepts common 900M-style tips (typical for 907/908 handles)
ApplicationsPCB soldering, phone and computer repair, hobby projects
User LevelBeginner to professional repair technician
SafetyUse a metal stand; tip and barrel stay hot for minutes after use
CableFixed mains lead, approx 1 m (typical)

Customer reviews

No reviews yet — be the first.

Questions about the Temperature Controlled Soldering Iron 907/908 with Regulator 60W 220V Adjustable 200-450°C

How do I use the regulator dial?
Plug it into a 220V socket, set the dial near 300-330°C for normal tin-lead solder, wait a few minutes for the tip to reach temperature, then tin the tip before your first joint.
Is it compatible with my soldering tips?
It follows the common 907/908 handle style, which usually accepts widely available 900M-series tips. Comparing the old tip or element with the new one before ordering is always wise.
What power does it need and is it safe?
It runs on ordinary 220V AC mains at about 60 W, so no adapter is required. Use a dry socket, keep the hot barrel on a stand, unplug when finished and work in a ventilated area.
How do I take care of the tip and heater?
Tin the tip before and after each session, wipe it on a damp sponge or brass wool while working, never file the plated surface and turn the dial down or unplug during long breaks.
সাধারণ আয়রনের বদলে এটা কেনো করবো কেন?
ডায়াল দিয়ে তাপমাত্রা ঠিক করে কাজ করা যায় বলে প্যাড উঠে যাওয়া বা ছোট কম্পোনেন্ট নষ্ট হওয়ার ঝুঁকি কমে, তাই রিপেয়ার কাজে ডায়াল-কন্ট্রোল আয়রন বেশি সুবিধা দেয়।
এই সোল্ডারিং আয়রনের দাম কত?
বর্তমান দাম এই পেজের ওপরেই দেখা যায়; Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিলে আজকের দাম জানিয়ে দেওয়া হবে।