
Tools & Accessories
10 kΩ potentiometer
৳20
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The 10 kΩ potentiometer is a panel-mount rotary pot, the classic B103 linear-taper part used for volume, brightness and speed control. Wire it as a voltage divider and the ADC pin of an Arduino, ESP32 or any microcontroller reads the knob position as a clean analog value, which is why it turns up in LED dimmers and motor speed knobs.
- 10k ohm (B103) linear taper, single turn over roughly 300 degrees
- Three solder lugs, so it wires as a divider or as a rheostat
- Approx 6mm knurled metal shaft with a threaded bushing for panel mounting
- Track rating is about 0.05W, so keep motor current out of it
To order, message us on WhatsApp with Cash on Delivery across Bangladesh.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
| Category | Tools & Accessories |
| Model no. | POT-10K-B |
| Availability | In stock |
| In stock | 9 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
| Resistance | 10k ohm (code B103) |
| Taper | Linear (B type) |
| Resistance Tolerance | approx ±20% |
| Rotation | single turn, approx 300° travel |
| Power Rating | approx 0.05W |
| Maximum Track Voltage | approx 50V DC/AC |
| Shaft | approx 6mm knurled metal shaft |
| Shaft Length | approx 15mm from bushing face |
| Mounting Hole | approx 7-8mm panel cutout with threaded bushing |
| Terminals | 3 solder lugs |
| Rotation Life | approx 10,000+ cycles |
| Operating Temperature | -25°C to +70°C |
| Typical Uses | Volume, brightness, motor speed and ADC divider circuits |
Customer reviews
No reviews yet — be the first.
Questions about the 10 kΩ potentiometer
How do I wire it to an Arduino?
Outer lugs to 5V and GND, centre wiper to A0. analogRead then returns roughly 0-1023 as the knob turns, with no library or extra parts needed.
Can this potentiometer control a motor directly?
No. The carbon track only handles about 0.05W, so let the pot feed a PWM value or a driver input and keep the motor current out of it.
What does the B marking on the body mean?
B means linear taper, so resistance climbs evenly with rotation. An A marking would be logarithmic, the type meant for audio loudness curves.
How is 10k different from a 1k or 100k pot?
10k keeps divider current low while still reading strongly on an ADC pin. 1k wastes more current but shrugs off noise, and 100k suits battery circuits though the ADC can load the reading.
The knob crackles or the reading jitters. What now?
That is usually a worn or dusty carbon track. Contact cleaner helps for a while, but a scratchy spot that stays means the wiper has worn through and the pot should be replaced.
10 kΩ potentiometer এর দাম কত?
সর্বশেষ দাম এই পেজের ওপরেই দেখানো আছে; 'Contact for price' লেখা থাকলে WhatsApp-এ মেসেজ দিয়ে আজকের রেট জেনে নিন।


