Skip to content
Modules

USB to TTL Converter (PL2303)

Contact for price

The USB to TTL Converter (PL2303) turns a PC's USB port into a 3.3V or 5V UART, which is how you program and talk to boards with no onboard USB. It is the tool for flashing an Arduino Pro Mini, reading a GPS module's NMEA output, debugging an ESP-01 and wiring into any chip's TX/RX pins.

  • PL2303 chipset with drivers for Windows and Linux
  • Jumper selects 3.3V or 5V logic on the pin header
  • Header carries the supply pin, TX, RX and ground
  • Shows up as a standard COM port once the driver is installed

Set the voltage jumper to match your target board before you wire it up; 5V into a 3.3V-only pin can damage it.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Chipset: PL2303

Interface: USB to UART TTL

Operating Voltage: 3.3V/5V selectable

CategoryModules
Model no.PL2303
AvailabilitySourced on request — ask for price & lead time
In stock6 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the USB to TTL Converter (PL2303)

What is the USB to TTL Converter (CP2102) used for?
The USB to TTL Converter (CP2102) is a module commonly used for adding a specific function — wireless communication, motor control, or power regulation — to a larger electronics project.
Is the USB to TTL Converter (CP2102) compatible with Arduino and ESP32?
Yes, the USB to TTL Converter (CP2102) works with Arduino, ESP32, ESP8266, and most other microcontroller boards using standard digital, analog, I2C, SPI, or UART connections, depending on the module.
How do I connect the USB to TTL Converter (CP2102) to my project?
Connect the power (VCC) and ground (GND) pins first, then wire the signal or data pin(s) to the appropriate digital, analog, or communication pins on your board, and install any required library before uploading your code.
USB to TTL Converter (CP2102) কিভাবে ব্যবহার করবো?
USB to TTL Converter (CP2102) টি একটি নির্দিষ্ট কাজ (ওয়্যারলেস কমিউনিকেশন, মোটর কন্ট্রোল, পাওয়ার রেগুলেশন) যোগ করার জন্য ব্যবহার করা হয়। এটি সাধারণত Arduino বা ESP32 কোডের মাধ্যমে কন্ট্রোল করা হয়।
USB to TTL Converter (CP2102) কেনো ব্যবহার করা হয়?
এই module টি প্রজেক্টে নির্ভরযোগ্যভাবে ডেটা সংগ্রহ বা নির্দিষ্ট কাজ সম্পন্ন করার জন্য ব্যবহার করা হয়, যা ম্যানুয়ালি করা কঠিন বা অসম্ভব।
USB to TTL Converter (CP2102) কোথায় পাওয়া যাবে এবং কিভাবে লাগাবো?
এটি Tekko-এর ওয়েবসাইট ও শোরুমে পাওয়া যাবে। লাগানোর জন্য প্রথমে VCC ও GND পিন সংযোগ করুন, এরপর সিগন্যাল/ডেটা পিনটি আপনার Arduino বা ESP32 বোর্ডের সঠিক পিনের সাথে যুক্ত করুন।