
USB Type A Male Female Breakout Board
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
Buy USB Type A Male Female Breakout Board at the best price in Bangladesh.
This pair of small breakout boards brings all four USB Type-A pins - VCC, D-, D+ and GND - out to ordinary 2.54 mm headers, one board with a male plug and one with a female socket. Suddenly USB stops being a mystery cable: tap 5 V from a charger to power a breadboard project, test whether a suspicious cable's data lines are intact, or wire a homemade device into a host port for debugging. Makers in Bangladesh reach for these boards when building USB-powered gadgets, fixing chargers and cables, making DIY flashable jigs, or probing serial adapters that hide inside USB housings. The boards are breadboard-friendly, need no soldering for quick tests, and cost less than the cable you will save. Buy USB Type A Male Female Breakout Board in Bangladesh from Tekko - it is the debugging accessory you do not appreciate until the day it saves an hour.
Key Features:
• Two boards: USB Type-A male plug breakout + USB Type-A female socket breakout
• All 4 pins (VCC, D-, D+, GND) brought out to 2.54 mm headers
• Breadboard-friendly - plug straight into a prototyping board
• Screw-terminal options accept around 16-26 AWG wire for permanent links
• Tap 5 V power from any USB charger, power bank or port
• Exposes D+ / D- for cable testing and low-speed data probing
• Compact FR4 boards, roughly 15-25 mm square each
• Ideal for charger and cable repair, DIY jigs and USB-powered projects
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Product Type: USB Type-A breakout board pair (male + female)
Pins Exposed: 4 - VCC, D-, D+, GND
Header Pitch: 2.54 mm, breadboard-compatible
Terminal Option: screw terminals for approx. 16 - 26 AWG wire (board dependent)
PCB Size: approx. 15 - 25 mm square per board
Board Material: FR4 fiberglass
Power Handling: USB 2.0 levels, approx. 500 mA - 1 A on VCC/GND (connector limit)
Data Lines: D+ / D- accessible for testing and low-speed probing
Connector Standard: USB Type-A plug and socket, USB 2.0 pinout
Polarity Marking: pin labels printed on the PCB
Typical Uses: cable/charger testing, 5 V power take-off, DIY host-device jigs
| Category | Modules |
| Model no. | USB-A-BRK |
| Availability | In stock |
| In stock | 1 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the USB Type A Male Female Breakout Board
What is a USB Type A male female breakout board?
It is a small PCB that carries a USB Type-A connector - one version with a male plug, one with a female socket - and routes its four pins (VCC, D-, D+, GND) to easy-to-use headers or terminals, so you can connect USB signals to wires, breadboards or test gear.
How is the USB pinout arranged on the breakout?
Standard USB Type-A numbering applies: pin 1 is VCC (5 V), pin 2 is D-, pin 3 is D+ and pin 4 is GND. The boards print the labels next to each header, so you rarely need to guess.
What can I do with the male and female pair?
The male board plugs into a charger or host port to bring 5 V and data out; the female board lets a USB device or cable plug into your breadboard wiring. Together they turn any USB cable into a testable, tappable connection.
Can I power my Arduino project from a phone charger with it?
Yes - wire VCC and GND from the male breakout to your board's power input and a standard 5 V USB charger or power bank supplies the project, typically up to 500 mA to 1 A depending on the charger. Just remember the breakout has no regulation: it passes the port's 5 V straight through.
Can I transfer actual USB data through it?
The D+ and D- lines are fully connected, so normal USB data passes through. On a breadboard with jumper wires, long or untidy runs can degrade signal quality at high speed - for flash drives and serial adapters it usually works fine, but keep the wires short.
Is it useful for repairing chargers and cables?
Very - the most common USB fault is a broken VCC, D+ or D- wire, and this board turns continuity checking into a two-minute job with a multimeter. You can also verify which charger actually delivers its rated current on the 5 V line.
Do I need to solder anything to use it?
For quick tests, no - the 2.54 mm headers accept jumper wires and the screw-terminal versions clamp bare wire directly. For a permanent installation, a little solder on the headers makes the joint vibration-proof.
USB Type A Breakout Board-এর দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন - ওখানেই আপডেটেড প্রাইস আর স্টক তথ্য থাকে।
USB ব্রেকআউট বোর্ড কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে, অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারি করা হয়।
এই বোর্ড কী কাজে লাগে?
চার্জার থেকে 5V নিয়ে প্রজেক্ট চালানো, ক্যাবল বা চার্জারের ভেতরের তার পরীক্ষা করা, DIY ডিভাইসকে হোস্ট পোর্টে যোগ করা - USB-র চারটা পিন হাতের মুঠোয় পেয়ে যান।
মোবাইল চার্জার দিয়ে প্রজেক্ট চালাতে কিভাবে লাগাবো?
মেল বোর্ডটা চার্জারে লাগিয়ে VCC আর GND পিন থেকে দুটি তার আপনার বোর্ডের পাওয়ার ইনপুটে যোগ করুন - চার্জারের 5V সরাসরি প্রজেক্টে চলে আসবে, শুধু কারেন্ট লিমিট মাথায় রাখবেন।
নতুনদের জন্য এটা কেনা কি দরকার?
অবশ্যই - দাম কম, আর USB ক্যাবল, চার্জার বা সিরিয়াল অ্যাডাপ্টারের সমস্যা ধরতে এর চেয়ে সহজ টুল নেই; একবার নিলে বছরের পর বছর কাজে লাগবে।


