
10µF 10V Capacitor
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
Buy 10µF 10V Capacitor at the best price in Bangladesh.
A 10 µF 10 V aluminium electrolytic is one of those values that shows up in nearly every through-hole design you will ever build: power-supply filtering after a regulator, decoupling at the input of an audio stage, timing networks with a resistor, or smoothing the hum out of an Arduino project's 5 V rail. The radial can with a 2.54 mm pitch drops straight into breadboards and PCB footprints, the marked stripe keeps polarity obvious, and the value is big enough to matter yet small enough not to stress a regulator at power-up. Students in Bangladesh buy these in tens because lab exercises, power-supply builds and audio experiments all call for exactly this size. Buy 10µF 10V Capacitor in Bangladesh from Tekko and refill your parts drawer before the next lab session - a project stopped mid-week by a missing cap is the worst bargain in electronics.
Key Features:
• 10 µF capacitance in a 10 V DC aluminium electrolytic can
• Radial through-hole body with 2.54 mm lead pitch for breadboards and PCBs
• Marked polarity stripe makes correct orientation quick to verify
• Smooths supply rails, decouples audio stages and sets RC timing circuits
• +/-20% tolerance suits general-purpose filtering work
• Wide temperature operation for classroom and bench environments
• Fits regulator outputs, sensor boards and small amplifier builds
• One of the most-replaced values - economical to keep in stock
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
Product Type: aluminium electrolytic capacitor
Capacitance: 10 uF
Rated Voltage: 10 V DC
Tolerance: +/-20% (typical standard series)
Structure: radial through-hole, 2 leads
Lead Pitch: 2.5 mm (typical for this can size)
Can Size: approx. 5 x 11 mm
Polarity: marked stripe on the negative lead - observe polarity in DC circuits
Temperature Range: approx. -40 to +105 degree C (standard series)
Load Life: approx. 1000 - 2000 hours at rated temperature and voltage
Typical Uses: supply filtering, decoupling, RC timing, audio coupling
Substitution Rule: replace only with the same capacitance and an equal or higher voltage rating
| Category | Capacitors |
| Model no. | CAP-10UF-10V |
| Availability | In stock |
| In stock | 20 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
Customer reviews
No reviews yet — be the first.
Questions about the 10µF 10V Capacitor
What is a 10uF 10V electrolytic capacitor used for?
It stores charge to smooth and stabilise circuits: filtering the output of a voltage regulator, decoupling an audio or amplifier stage, forming RC timing networks, and removing ripple from DC supplies in Arduino and sensor projects.
Which lead is positive, and what happens if I connect it backwards?
The plain lead is positive and the lead next to the marked stripe is negative. Reverse connection makes the capacitor leak, heat and eventually vent or dry out, so always double-check orientation before applying power.
Can I use this 10V capacitor on a 9V circuit?
Technically 9 V is inside the 10 V rating, but it leaves almost no headroom, and real-world rails spike above their nominal voltage. For a 9 V battery circuit, choose a 16 V or 25 V part of the same capacitance - the rule is: equal or higher voltage rating, never lower.
How do I read or verify the value?
The can is printed with the capacitance and voltage (for example 10uF 10V), and a capacitance meter or multimeter with a cap mode confirms it. Remember the +/-20% tolerance means a reading anywhere from about 8 to 12 uF is normal.
Can it be used in AC circuits?
Not directly - electrolytics are polarised and will fail under reversed voltage. They are meant for DC and low-frequency smoothing; for audio signal coupling they work because the DC bias keeps the polarity correct, but pure AC across one will destroy it.
How long does an electrolytic capacitor last?
Around 1000-2000 hours at its rated temperature and voltage, and much longer when run cool and below the rating. In hobby projects on a bench that usually means many years; heat is the main life-shortener.
Can I replace a faulty 10uF cap with a 16V or 25V one?
Yes - the voltage rating can be higher with the same capacitance and the circuit works identically, just with a slightly larger can. Never substitute a lower voltage rating, and match capacitance unless the design notes say otherwise.
10µF 10V Capacitor-এর দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন - ওখানেই আপডেটেড প্রাইস দেওয়া থাকে।
এই ক্যাপাসিটর কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে, অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারি পাবেন।
সার্কিটে ক্যাপাসিটর কী কাজে লাগে?
সাপ্লাইয়ের রিপল কমানো, অডিও স্টেজের ডিকাপলিং আর RC টাইমিং - এই তিন কাজেই 10uF সবচেয়ে প্রয়োজনীয় ভ্যালু, তাই ল্যাব আর প্রজেক্ট দুটোতেই এটা হাতের কাছে রাখা ভালো।
বোর্ডে কিভাবে লাগাবো?
দীর্ঘ প্লেইন লেগ পজিটিভ, স্ট্রাইপ-চিহ্নিত লেগ নেগেটিভ - সার্কিটের পজিটিভ রেলে প্লেইন লেগ আর গ্রাউন্ডে স্ট্রাইপ লেগ বসিয়ে দিন, উল্টো লাগালে ক্যাপাসিটর গরম হয়ে নষ্ট হতে পারে।
10V-র চেয়ে বেশি ভোল্টেজ দিলে কি হবে?
রেটিংয়ের বেশি ভোল্টেজে ক্যাপাসিটর দ্রুত লিক, গরম বা ফেটে যাওয়ার ঝুঁকিতে পড়ে - তাই রেটিংয়ের চেয়ে কম ভোল্টেজে চালান, আর 9V বা 12V সার্কিটে 16V/25V রেটেড ক্যাপ বেছে নিন।


