Skip to content
Capacitors

220uf 16v Capacitor

৳16

The 220uf 16v capacitor is the go-to reservoir for 5V and 12V circuits, exactly the voltage world of Arduino, ESP32 and Raspberry Pi boards. Placed across a breadboard power rail it absorbs the surge when a servo lurches or a radio module transmits, which stops the reset glitches that baffle beginners. After a wall adapter it turns choppy DC into clean DC.

  • 220uF at approx ±20% tolerance, 16V DC
  • Sized for 5V, 9V and 12V rails
  • Polarized: longer lead positive, stripe marks negative
  • Approx 6.3 x 11 mm body, 2.5 mm lead spacing
  • Rated -40°C to +105°C, 1000 hour load life

Because 220 microfarads is the standard reservoir inside countless consumer boards, this is also one of the most common replacement cans for small amplifier, toy and set-top-box repairs. Send us a WhatsApp message to order, cash on delivery anywhere in Bangladesh.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Capacitance: 220uF (220 microfarads)

Rated Voltage: 16V DC

Tolerance: approx ±20%

Type: Aluminum Electrolytic

Mounting: Radial Through-Hole

Polarity: Polarized — longer lead is positive, stripe marks negative

Lead Spacing: approx 2.5mm

Body Size: approx 6.3mm diameter x 11mm height (typical)

Temperature Range: -40°C to +105°C

Load Life: 1000 hours at rated temperature

Ripple Current: moderate to high, suited to rail reservoir duty

Typical Uses: 5V/12V rail reservoir, servo and radio spike buffering, adapter smoothing, small board repair

CategoryCapacitors
Model no.CAP-220UF-16V
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 220uf 16v Capacitor

Why is 220uF 16V the typical Arduino reservoir capacitor?
220uF is large enough to swallow servo and radio current spikes, and 16V covers every regulated hobby rail — the combination has become the default in student and maker designs.
Where exactly should I place it on a breadboard?
Across the two power rails — longer lead into the 5V row, striped lead into the GND row, as close to the board's power feed as possible for the best spike absorption.
Can it smooth the output of a 12V wall adapter?
Yes — behind a bridge or regulator it filters ripple well on a regulated 12V rail; for unregulated adapters that exceed 16V, choose a 25V or 50V part.
What happens if polarity is reversed?
The part conducts in reverse, heats up and may vent — check the stripe against ground before applying power.
220uF or 470uF for a servo project?
One or two servos usually settle with 220uF; four or more, or long wires to the supply, benefit from 470uF or a parallel pair.
How long does it last?
Roughly 1000 rated hours at maximum temperature and years at room conditions; replace it when resets return, rails sag, or the can bulges.
Is it a good part for a first soldering kit?
Yes — its polarity stripe teaches correct electrolytic orientation, and its leads fit standard 2.5mm-pitch holes without forcing.
220uf 16v ক্যাপাসিটরের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন — ওখানেই সর্বশেষ প্রাইস দেওয়া থাকে।
এই ক্যাপাসিটরটা কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে; অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারি পাবেন।
আরডুইনো প্রোজেক্টে এটা কী কাজে লাগে, কেনো করবো?
সার্ভো আর রেডিও মডিউলের চাপে রেল ঝাঁকিয়ে বোর্ড রিসেট হওয়া বন্ধ করতেই 220uF সবচেয়ে প্রথমে কাজে লাগে — সার্ভো প্রোজেক্ট করলে এটা লাগবেই।
ব্রেডবোর্ডে কিভাবে লাগাবো?
পাওয়ার রেলের + লাইনে লম্বা লিড, GND লাইনে দাগের লিড বসান — বোর্ডের পাওয়ার ফিডের কাছে দিলে সবচেয়ে ভালো কাজ করে।
খেলনা বা সেট-টপ বক্স রিপেয়ারে কি এটা ম্যাচ করবে?
বেশিরভাগ ছোট বোর্ডেই 220uF 16V লাগানো থাকে, তাই পুরনো ফুলে-যাওয়া ক্যাপ বদলানোর জন্য এটা সবচেয়ে কমন রিপ্লেসমেন্ট ভ্যালুগুলোর একটা।