Skip to content
Capacitors

22 uf 16v Capacitor

৳16

The 22 uf 16v capacitor is the compact all-rounder for circuits that need a small reservoir, not a big one: op-amp bias networks, switch debounce, 555 timing nodes and light smoothing behind sensor or radio modules on 5V to 12V rails. At 22 microfarads it filters mid-range ripple that ceramic discs cannot swallow while staying slim enough for crowded student boards.

  • 22uF at approx ±20% tolerance, 16V DC
  • Comfortable on 5V, 9V and 12V rails
  • Polarized: longer lead positive, stripe marks negative
  • Approx 5 x 11 mm body, 2 mm lead spacing
  • Rated -40°C to +105°C, 1000 hour load life

Repair technicians use this value constantly on remote, set-top and small audio boards where the original can is 22uF. Order through WhatsApp and it ships nationwide, cash on delivery.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Capacitance: 22uF (22 microfarads)

Rated Voltage: 16V DC

Tolerance: approx ±20%

Type: Aluminum Electrolytic

Mounting: Radial Through-Hole

Polarity: Polarized — longer lead is positive, stripe marks negative

Lead Spacing: approx 2mm

Body Size: approx 5mm diameter x 11mm height (typical)

Temperature Range: -40°C to +105°C

Load Life: 1000 hours at rated temperature

Leakage Current: very low after initial charge

Typical Uses: op-amp biasing, switch debounce, RC timing, light supply filtering on 5-12V rails

CategoryCapacitors
Model no.CAP-22UF-16V
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 22 uf 16v Capacitor

What is a 22uF 16V capacitor used for?
It filters light ripple on low-voltage rails and handles timing and bias jobs — op-amp non-inverting input biasing, button debounce, 555 timing networks and smoothing behind sensor modules.
Can I use it instead of a 47uF part?
For signal-level and timing duty, usually yes with a small shift in values; for serious supply smoothing the halved reserve shows up as more ripple, so prefer 47uF or 100uF there.
How do I wire it on a breadboard with an Arduino?
Longer lead into the power-rail row tied to 5V, striped lead into the GND rail — the capacitor then buffers spikes from servos, radios and LEDs.
Is 16V enough for a 12V circuit?
Yes, a regulated 12V rail sits safely under 16V; only unregulated or mains-derived supplies need a higher voltage class.
What happens if the polarity is reversed?
The electrolytic conducts in reverse, heats up and can vent — check the stripe before powering the circuit.
How long will it last in a finished project?
Thousands of hours at room temperature; the 1000-hour load-life rating applies near its maximum temperature, and aging shows as capacity drop or bulging.
Can beginners solder it without damage?
Yes — a brief touch from a standard iron is enough; prolonged heat can reduce capacity, so solder quickly and trim the leads after.
22 uf 16v ক্যাপাসিটরের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন — ওখানেই সর্বশেষ প্রাইস আপডেট থাকে।
এই ভ্যালুর ক্যাপাসিটর কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে; সারা বাংলাদেশে হোম ডেলিভারি সুবিধা আছে।
ছোট সার্কিটে এটা কী কাজে লাগে, কেনো করবো?
অপ-অ্যাম্প বায়াস, বাটন ডিবাউন্স আর টাইমিং সার্কিটের জন্য 22uF একটা পারফেক্ট মাঝারি ভ্যালু — মেন্টেন্যান্স কাজেও এটা সবচেয়ে বেশি লাগে।
PCB-তে কিভাবে লাগাবো?
বোর্ডের + চিহ্নের হোলে লম্বা লিড, পাশের হোলে দাগের লিড বসিয়ে সোল্ডার করুন — পলারিটি উল্টালে ক্যাপাসিটর নষ্ট হতে পারে।
রিমোট বা অডিও বোর্ড রিপেয়ারে কি এটা কাজ করবে?
হ্যাঁ — অনেক রিমোট, সেট-টপ বক্স আর ছোট অ্যামপ্লিফায়ার বোর্ডেই 22uF লাগানো থাকে, তাই রিপ্লেসমেন্ট হিসেবে সবচেয়ে প্রচলিত ভ্যালুগুলোর একটা।