Skip to content
Capacitors

220uf 50v Capacitor

৳16

The 220uf 50v capacitor is a medium reservoir for circuits that live above hobby voltage: 24V and 36V rails, small amplifier supplies, DC-DC converter inputs and the filter stage of a linear regulator. Two hundred twenty microfarads holds a rail through bass transients and switching events, and the 50V rating leaves a wide margin where a 16V part would be living dangerously.

  • 220uF at approx ±20% tolerance, 50V DC
  • High ripple current, suited to reservoir and filter duty
  • Polarized: longer lead positive, stripe marks negative
  • Approx 10 x 16 mm can, 3.5 mm lead spacing, standard supply footprint
  • Rated -40°C to +105°C, 1000 hour load life

Students meet this part at the rectifier output of their first bench supply, and repair benches count it among the most-replaced values. To order, message Tekko on WhatsApp; nationwide delivery, cash on delivery.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Capacitance: 220uF (220 microfarads)

Rated Voltage: 50V DC

Tolerance: approx ±20%

Type: Aluminum Electrolytic

Mounting: Radial Through-Hole

Polarity: Polarized — longer lead is positive, stripe marks negative

Lead Spacing: approx 3.5mm

Body Size: approx 10mm diameter x 16mm height (typical)

Temperature Range: -40°C to +105°C

Load Life: 1000 hours at rated temperature

Ripple Current: high, suited to reservoir and filter duty

Typical Uses: 24V/36V rail smoothing, amplifier supply reservoir, regulator filter stage, adapter and printer-board repair

CategoryCapacitors
Model no.CAP-220UF-50V
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 220uf 50v Capacitor

What is a 220uF 50V capacitor used for?
Medium bulk filtering above hobby voltages — smoothing 24V/36V rails, serving as the reservoir in small amplifier supplies, filtering regulator outputs, and replacing tired cans in adapters and amplifier boards.
Can I use it on a 12V or 5V project?
Absolutely — lower working voltage simply extends its life; you trade nothing electrically except a slightly larger body than a low-voltage part.
How does it compare with 470uF at the same voltage?
470uF holds about twice the charge for heavier ripple and motor-start duty; 220uF is enough for most steady amplifiers and regulator filters and costs less.
Which lead goes to ground?
The striped one — the negative terminal. The longer unmarked lead connects to the positive node; reversing polarity on a big electrolytic causes heat, venting and failure.
Can two 220uF parts be paralleled for more capacity?
Yes — paralleling gives 440uF at the same 50V rating, a common trick when a board needs more reservoir than a single can provides.
How do I test one before installing?
A capacitance meter should read within about ±20% of 220uF; visible bulging on the top or electrolyte residue means immediate replacement.
Is it safe for beginner soldering projects?
Yes — observe polarity, solder quickly with a standard iron, and never power the circuit while the capacitor is reversed.
220uf 50v ক্যাপাসিটরের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন — ওখানেই আপডেটেড প্রাইস পাবেন।
এই ক্যাপাসিটর কোথায় পাবো সহজে?
Tekko অনলাইন স্টোরে স্টকে আছে; সারা বাংলাদেশে হোম ডেলিভারিতে পৌঁছে দেওয়া হয়।
অ্যাডাপ্টার-অ্যামপ্লিফায়ার রিপেয়ারে এটা কী কাজে লাগে, কেনো করবো?
হাই-ভোল্টেজ সাইডের ফিল্টার ক্যাপ হিসেবে 220uF 50V বারবার নষ্ট হয়, তাই রিপেয়ারের স্টকে এই ভ্যালু রাখা প্রায় বাধ্যতামূলক।
রেগুলেটর সার্কিটে কিভাবে লাগাবো?
রেক্টিফায়ারের আউটপুটে লম্বা লিড + সাইডে আর দাগের লিড GND-তে দিন, রেগুলেটরের আউটপুটে চাইলে আরেকটা পাশে বসালে ডিসচার্জ লোডেও রেল স্থিতিশীল থাকে।
প্রথম বেঞ্চ পাওয়ার সাপ্লাই বানাতে চাইলে এটা যথেষ্ট কি?
হ্যাঁ — ব্রিজ রেক্টিফায়ারের পরে এই 220uF ক্যানটা বসালেই স্কুল-কলেজ প্রোজেক্টের জন্য মসৃণ DC পাওয়া যায়, প্রয়োজনে দুটো প্যারালালে দিলে রিপল আরও কমে।