Skip to content
Diode

1N4148 Diode

৳6

The 1N4148 Diode is the fast-switching signal diode for low-current jobs: 150 mA and 100 V ratings, a 4 ns recovery time and a small DO-35 glass body.

Where it earns its place: clamping spikes on microcontroller inputs, flyback on small relay coils, diode-OR between two supplies, homemade logic gates, RC timing in oscillators. Rectifier diodes are far too slow for these; the 1N4148 keeps pulses clean into the megahertz range.

  • 4 ns reverse recovery, junction capacitance around 4 pF
  • 150 mA average forward current, 100 V reverse voltage
  • DO-35 glass body; bend the leads gently, the glass is brittle
  • 1N4448 and 1N914 substitute directly in almost any hobby circuit

For anything above about 100 mA, move up to a 1N4007; for speed, nothing else in the drawer does this job.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategoryDiode
Model no.1N4148
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh
Device1N4148 fast switching signal diode
Configurationsingle axial diode
Average Forward Current150 mA
Peak Repetitive Currentapprox. 450 mA
Reverse Voltage (VR)100 V
Forward Voltage (VF)approx. 1.0 V max (about 0.7 V typical)
Reverse Recovery Time4 ns
Peak Surge Currentapprox. 2 A
Junction Capacitanceapprox. 4 pF
Power Dissipation500 mW
PackageDO-35 glass axial, cathode marked with band
Typical Usesinput clamps, small relay flyback, logic and timing circuits, diode-OR

Customer reviews

No reviews yet — be the first.

Questions about the 1N4148 Diode

What makes the 1N4148 different from a 1N4007?
The 1N4148 switches about a thousand times faster and carries less current (150 mA against 1 A), so use it in signal and logic circuits and reach for the 1N4007 when real power handling is needed.
How do I use it to protect an Arduino input pin?
Wire one from the input pin to VCC and another from GND to the input, both in the blocking direction, so any voltage spike outside the rails gets clamped into the supply instead of frying the pin.
Can it handle a relay coil?
Small signal relays with coils under about 100 mA are fine. For heavier relay coils, contactors or motors, use a 1N4007 or 1N5408 as the flyback diode.
Why does my circuit need such a fast diode?
In high-speed switching and timing circuits a slow diode stays conducting after the pulse ends and corrupts the signal. The 4 ns recovery of the 1N4148 keeps pulses clean up into the megahertz range.
How do I build a diode-OR power circuit with it?
Put one 1N4148 in series with each supply feeding a common node, banded ends toward the load, so whichever source has the higher voltage wins automatically and the others cannot back-feed it.
1N4148 ডায়োডের দাম কত?
এই পেজের ওপরেই বর্তমান দাম দেখানো থাকে; Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিন, আজকের রেট জানিয়ে দেওয়া হবে।